Configuration
Multicast Usage of 1080P Extender
Multicast Usage Instructions When using wired transmission (connected via a switch), the multicast protocol supports up to 1 transmitter to 254 receivers. Steps for Multicast Configuration 1. Enable Multicast Functionality Check the option to enable ...
IR Remote Control Usage of 1080P Extender
IR Remote Control Usage Guide NOTES: The extender does not include a remote control; it only transmits IR signals. If you need to control remote devices (e.g., DVD players or TV set-top boxes), our device supports the transmission of IR signals. ...
Modify Output Resolution of RX for 1080P Extender
Modify Output Resotution of Receiver The default output resolution of the 4K receiver (RX) is set to 1080P. If a 4K resolution output is required, manual modification is necessary. Method 1: Using the "RST" Button Press and hold the "RST" button on ...
Modify Wi-Fi Channels for 1080P Extender
Modifying Wi-Fi Channels to Avoid Interference When using multiple sets of devices at the same location, interference or wireless signal issues may occur. To resolve this, users can modify the Wi-Fi transmission channel. Steps to Modify Wi-Fi ...
Adjust Bitrate for 1080P Extender
Adjusting Bitrate for Optimal Transmission Performance In certain scenarios, adjusting the bitrate can improve transmission performance. The bitrate range is 2 Mbps to 8 Mbps, and it should be configured based on actual needs: Example Scenarios ...
Pairing Methods for 1080P Extender
Pairing Instructions for 1080P Extender 1-to-1 Mode (1x Transmitter and 1x Receiver) 1. Connect the Signal Source to the Transmitter Insert the HDMI signal source into the HDMI IN port on the transmitter(TX). Important: Ensure the signal source is ...
RTSP Stream of 1080P Extender
ONLY available for Transmitter Power on the transmitter via DC 12V; Connect it to the switch or router via Ethernet cable; Or Connect it to your PC via Ethernet cable directly(In this way, it's necessary to add one more network segment to your PC ...