IR Remote Control Usage for 1080p HDMI Extenders | Exvist Support

IR Remote Control Usage of 1080P Extender

IR Remote Control Usage Guide

Notes
NOTES: The extender does not include a remote control; it only transmits IR signals.
If you need to control remote devices (e.g., DVD players or TV set-top boxes), our device supports the transmission of IR signals.
Example: Using the remote control on the receiver side to control a remote set-top box:
  1. Insert the supplied IR emitter into the IR OUT port on the transmitter (TX).
  2. Ensure the IR emitter is placed directly in front of the IR sensor of the set-top box.
Important Notes:
  1. Only IR remote controls are supported; Bluetooth remote controls are not.
To identify an IR remote:
  1. IR remotes usually have a transparent LED at the front and require line-of-sight with the device for operation.
  2. Bluetooth remotes lack a front LED and do not require line-of-sight, as they can operate in any direction.

    • Related Articles

    • FAQs: Troubleshooting & Solutions of 4K Extender

      Q1. How do I troubleshoot a black screen on my 4K RX device? If you are experiencing a black screen on your 4K RX device, first check the resolution settings. If the default output resolution is set to 3840x2160p, and the display does not support 4K, ...

    • Multicast Usage of 1080P Extender

      Multicast Usage Instructions When using wired transmission (connected via a switch), the multicast protocol supports up to 1 transmitter to 254 receivers. Steps for Multicast Configuration 1. Enable Multicast Functionality Check the option to enable ...

    • Introduction of 1080p Extender

      Introduction EXVIST 1080P wireless hdmi extender transmitter & receiver, also called image transmission system, is designed for wireless or wired transmission of high definition audio and video signals via HDMI from the audio-visual devices to the ...

    • Model Comparison of 1080P Extender

      200M 1080P Wireless HDMI Transmitter and Receiver Kits Part Number ITS2WB SERIES ITS2WV SERIES ITS2WG SERIES Video Encoding H.265 Ports of Transmitter 1x HDMI Input, 1x HDMI Output 1x HDMI Input, 1x HDMI Output 1x VGA Input, 1x VGA Output Ports of ...

    • Quick Start of 1080p Extender

      Wiring Method Connect HDMI signal source to the port "HDMI IN" of Transmitter; Connect the port "HDMI OUT" of Receiver to the monitor or TV via HDMI cable; Power on Transmitter(TX) & Receiver(RX), After about 40 seconds, the RUN indicator will flash ...