System
Auto Reboot of Encoder
What's Auto Reboot? Auto Reboot is a feature that allows the encoder/decoder to be set to automatically restart at a specified time. Auto Reboot Go to Setting-System-Auto Reboot Learn more about FAQs of Auto Reboot FAQs: Auto Reboot of Encoder
Overview of Encoder
Overview Click Setting and it'll show you the Overview of current status of encoder as below: Learn more about FAQs of Overview FAQs: Overview of Encoder
Maintain of Encoder
Maintain Go to Setting->System->Maintain Item Description System reboot Click "System reboot" to reboot the encoder System default Click "System default" to reset the encoder to the default factory settings Upgrade Strongly recommended to do ...
Uart Transmit of Encoder
What's Uart Transmit? UART (Universal Asynchronous Receiver/Transmitter) transmit, often abbreviated as UART TX, refers to the function within a microcontroller or other integrated circuit that is responsible for transmitting data over a UART serial ...
System Info of Encoder
System Info Go to Setting->System->System Info Item Description Firmware version Current firmware version and date of release which you can tell from the version number. Hardware version Current hardware version Mac address Unique Mac address Serial ...
Date & Time of Encoder
Time Zone Go to Setting->System->Date & Time Item Description Date Current exact date Time Current time Time Zone Select the correct time zone Sync mode Manually/NTP(By default) NTP server pool.ntp.org(By default) NTP port 123(By default) NTP ...
System Setting of Encoder
SS52 MS7 Encoder Series System Mode Go to Setting->System Setting->Select "System Mode" from the dropdown list: 1*2160P@25/30+D1@25/30 or 1*1080P@50/60 NOTES: It's important to ensure that the refresh rate is 60Hz, as failure to do so may result in ...