EXVIST HDMI Encoder: Viewing System Information (Firmware, Hardware & Serial Number)

System Info of Encoder

System Info

  1. Go to Setting->System->System Info
Item
Description
Firmware version
Current firmware version and date of release which you can tell from the version number.
Hardware version
Current hardware version
Mac address
Unique Mac address
Serial number
The serial number of this unit
P2P
The P2P number

Notes
NOTE: The version number "HDMI_V3.00.52.220921" can be interpreted as indicating that the firmware version was released on September 21st, 2022.
  1. "V3.00.52" indicates the major, minor, and patch version numbers of the firmware.
  2. "220921" represents the release date, with "22" for the year 2022, "09" for the month of September, and "21" for the 21st day of the month.

Learn more about FAQs of System Info

  1. FAQs: System Info of Encoder

    • Related Articles

    • FAQs: System Info of Encoder

      How can we tell when the firmware was released? The firmware version number often contains information that indicates when it was released. For example, "V3.00.52.220921," the information can be interpreted as follows: "V3.00.52" comprises the main ...

    • FAQs: System Settings of Encoder

      System Mode Is it possible to switch the System Mode? Yes, it is possible to switch the system mode, subject to the following conditions: Depending on the models and their capabilities, the ability to switch system modes may vary. Some models may ...

    • FAQs: Maintain/Upgrade of Encoder

      Can we upgrade firmware directly through UI? Upgrading firmware directly through the user interface (UI) of an encoder is generally NOT RECOMMENDED, due to the potential risks associated with the process. Firmware upgrades can significantly impact ...

    • System Setting of Encoder

      SS52 MS7 Encoder Series System Mode Go to Setting->System Setting->Select "System Mode" from the dropdown list: 1*2160P@25/30+D1@25/30 or 1*1080P@50/60 NOTES: It's important to ensure that the refresh rate is 60Hz, as failure to do so may result in ...

    • Date & Time of Encoder

      Time Zone Go to Setting->System->Date & Time Item Description Date Current exact date Time Current time Time Zone Select the correct time zone Sync mode Manually/NTP(By default) NTP server pool.ntp.org(By default) NTP port 123(By default) NTP ...