System
Overview of Codec
Overview Click Setting and it'll show you the Overview of current status of encoder as below: NOTES: You can also read more about Channel of Codec. Learn more about FAQs of Overview FAQs: Overview of Codec
Auto Reboot of Codec
What's Auto Reboot? Auto Reboot is a feature that allows the encoder/decoder to be set to automatically restart at a specified time. Auto Reboot Go to Setting-System-Auto Reboot Learn more about FAQs of Auto Reboot FAQs: Auto Reboot of Codec
Channel of Codec
SS50 MS7 Codec Series Channel Go to Setting->System->Channel->Encode Channel or Decode Channel Add CH5->Click"Modify"->Select Protocol (SQ, RTSP, RTMP, TS[TS, HLS]) Enter Device Name->Device Address->Username->Password Click"Confirm" and then CH5 is ...
Maintain of Codec
Maintain Go to Setting->System->Maintain Item Description System reboot Click "System reboot" to reboot the encoder System default Click "System default" to reset the encoder to the default factory settings Upgrade Strongly recommended to do ...
System Info of Codec
System Info Go to Setting->System->System Info Item Description Firmware version Current firmware version and date of release which you can tell from the version number. Hardware version Current hardware version Mac address Unique Mac address Serial ...
Date & Time of Codec
Time Zone Go to Setting->System->Date & Time Item Description Date Current exact date Time Current time Time Zone Select the correct time zone Sync mode Manually/NTP(By default) NTP server pool.ntp.org(By default) NTP port 123(By default) NTP ...
System Setting of Codec
SS50 | SS52 MS7 Codec Series System Settings Go to Setting->System Setting->Change "Device Name" or Upload "Boot Logo" or "Video Lost Picture" if required Configure HDMI output resolution by scrolling down to desired resolution from Video Output ...