Overview of Codec

Overview

1. Click Setting and it'll show you the Overview of current status of encoder as below:

NOTES: You can also read more about Channel of Codec.

• Related Articles

• Quick Start of Codec

  Connection Diagram Power on encoder and connect it to router via ethernet cable NOTE: At the very beginning, it's strongly recommended to follow this instructions to connect the encoder, especially for network segment issues. If it's failed to be ...

• System Setting of Codec

  System Setting Go to Setting->System Setting->Upload "Boot Logo" or "Video Lost Picture" if required ?TIPS: 1. Currently it's unavailble for TV30 & SS50 Codec Series to switch system mode. If 50/60fps are required, please select encoder series. 2. ...

• FAQs: Channel of Codec

  SS50 MS7 Codec Series What is the decoding capacity of this codec in terms of channels? This codec can decode a maximum of four channels, which can be configured as 2x USB camera and 2x network streams, or 1x USB camera and 3x network streams, or ...

• Auto Reboot of Codec

  What's Auto Reboot? Auto Reboot is a feature that allows the encoder/decoder to be set to automatically restart at a specified time. Auto Reboot Go to Setting-System-Auto Reboot Learn more about FAQs of Auto Reboot FAQs: Auto Reboot of Codec

• FAQs: Log of Codec

  Print Log via Serial Port Connection Diagram HW: MC6630-CODEC_V2 HW: SS524-CODEC_V2 SERIAL PORT OF SS524-CODEC_V2 Wire Connection Diagram Procedure of Print Log 1. Download driver of CP2102 from the following link CP210x_Drivers 2. Install driver of ...