System Information for HDMI Codecs | Exvist Support

System Info of Codec

System Info

  1. Go to Setting->System->System Info
Item
Description
Firmware version
Current firmware version and date of release which you can tell from the version number.
Hardware version
Current hardware version
Mac address
Unique Mac address
Serial number
The serial number of this unit
P2P
The P2P number

Notes
NOTE: The version number "HDMI_V3.00.52.220921" can be interpreted as indicating that the firmware version was released on September 21st, 2022.
  1. "V3.00.52" indicates the major, minor, and patch version numbers of the firmware.
  2. "220921" represents the release date, with "22" for the year 2022, "09" for the month of September, and "21" for the 21st day of the month.

Learn more about FAQs of System Info

  1. FAQs: System Info of Codec

    • Related Articles

    • FAQs: System Info of Codec

      How can we tell when the firmware was released? The firmware version number often contains information that indicates when it was released. For example, "V3.00.52.220921," the information can be interpreted as follows: "V3.00.52" comprises the main ...
    • System Setting of Codec

      SS50 | SS52 MS7 Codec Series System Settings Go to Setting->System Setting->Change "Device Name" or Upload "Boot Logo" or "Video Lost Picture" if required Configure HDMI output resolution by scrolling down to desired resolution from Video Output ...
    • FAQs: System Settings of Codec

      Device Name How can I change the device name for my HDMI codec? To change the device name of your HDMI codec, follow these steps: Access Settings: Go to the Settings menu on your HDMI codec. Navigate to System: Select System, then choose System ...
    • FAQs: Channel of Codec

      SS50 MS7 Codec Series What is the decoding capacity of this codec in terms of channels? This codec can decode a maximum of four channels, which can be configured as 2x USB camera and 2x network streams, or 1x USB camera and 3x network streams, or ...
    • Channel of Codec

      SS50 MS7 Codec Series Channel Go to Setting->System->Channel->Encode Channel or Decode Channel Add CH5->Click"Modify"->Select Protocol (SQ, RTSP, RTMP, TS[TS, HLS]) Enter Device Name->Device Address->Username->Password Click"Confirm" and then CH5 is ...