System Setting of Codec

System Setting

Go to Setting->System Setting->Upload "Boot Logo" or "Video Lost Picture" if required

🧙TIPS:

1. Currently it's unavailble for TV30 & SS50 Codec Series to switch system mode. If 50/60fps are required, please select encoder series.

2. Please upload the corresponding & desired image to replace the default ones.

Related Articles
Quick Start of Codec
Connection Diagram Power on encoder and connect it to router via ethernet cable NOTE: At the very beginning, it's strongly recommended to follow this instructions to connect the encoder, especially for network segment issues. If it's failed to be ...
FAQs: System Settings of Codec
Device Name Boot Logo Video Lost Picture How can I replace the image of Video Loss? To replace the image of video loss and customize the display in the system setting, follow these steps: Navigate to Setting: Access the system settings by locating ...
FAQs: Video of Codec
Channel: CH1~CH8 How many channels can I configure for video settings on my HDMI codec? The number of channels you can configure for video settings depends on the specific model of your codec. For example, in the SS50 MS7 Codec Series, only CH1~CH4, ...
Video of Codec
Video Go to Setting->Video/Audio->Video Item Description Channel CH1~CH8 (Determined by added decoding channels) Video Main stream/Sub stream Codec type H.264/H.265 Resolution Up to 1920*1080P(Main Stream) Bitrate Mode VBR/CBR Framerate Up to ...
Maintain of Codec
Maintain Go to Setting->System->Maintain Item Description System reboot Click "System reboot" to reboot the encoder System default Click "System default" to reset the encoder to the default factory settings Upgrade Strongly recommended to do ...