FAQs: System Info | HDMI Codec

FAQs: System Info of Codec

How can we tell when the firmware was released?

The firmware version number often contains information that indicates when it was released. For example, "V3.00.52.220921," the information can be interpreted as follows:
  1. "V3.00.52" comprises the main version number and subversion number.
  2. "220921" represents the release date, presented as YYMMDD (Year, Month, Day).
Based on this interpretation, the firmware version "V3.00.52.220921" would suggest that it was released on September 21, 2022. If it's required to download the latest firmware, please go to Download Firmware which will ONLY be available for Registered Users.

What does 1920*1080P@30HZ mean?

If it shows 1920*1080P@30HZ on GUI, probably it's failed to detect the HDMI signal. Take the following steps if there is a failure to detect an HDMI signal. Ensuring that the HDMI cable is properly connected and meets the necessary requirements, as well as checking and adjusting the output resolution of the HDMI signal, can often resolve detection issues.

If the HDMI detection issue persists despite checking the cable and resolution, it could be related to the Extended Display Identification Data (EDID). The EDID is information provided by a display to the source device, and issues with EDID communication can result in detection failures. In such cases, troubleshooting the EDID communication and potentially getting the log when you're trying to connect this HDMI may be helpful for us to help you resolve the detection problem.
Info
More information, please refer to FAQs: Failure of Detection or Upgrading.

How can we determine which firmware version we should download?

Usually, you can determine the appropriate firmware version based on the serial number. If the serial number starts with HDMIGKE2023, download it from GK72 MS7 Encoder series. If it starts with HDMIGKE2022, download from GK72 ITE Encoder series. If it's displaying TV-MIX in the device manager, download from TV30 MS7 Codec Series or SS50 MS7 Codec SeriesIf you still have no idea which firmware version you should download, you can chat with our online chatbot and it will guide you on how to download the correct firmware related to your encoder or codec.
Notes
NOTE: Only registered users will have access to view all firmware pages.




    • Related Articles

    • Quick Start of Codec

      Connection Diagram Power on encoder and connect it to router via ethernet cable NOTE: At the very beginning, it's strongly recommended to follow this instructions to connect the encoder, especially for network segment issues. If it's failed to be ...
    • System Info of Codec

      System Info Go to Setting->System->System Info Item Description Firmware version Current firmware version and date of release which you can tell from the version number. Hardware version Current hardware version Mac address Unique Mac address Serial ...
    • System Setting of Codec

      System Setting Go to Setting->System Setting->Upload "Boot Logo" or "Video Lost Picture" if required ?TIPS: 1. Currently it's unavailble for TV30 & SS50 Codec Series to switch system mode. If 50/60fps are required, please select encoder series. 2. ...
    • FAQs: System Settings of Codec

      How can I replace the image of video loss? To replace the image of video loss and customize the display in the system setting, follow these steps: Navigate to Setting: Access the system settings by locating the "Settings" option in the menu of the ...
    • Maintain of Codec

      Maintain Go to Setting->System->Maintain Item Description System reboot Click "System reboot" to reboot the encoder System default Click "System default" to reset the encoder to the default factory settings Upgrade Strongly recommended to do ...