IPC Basic Settings: Configure Time, Users, Network, and More for Your IP Camera | Network Camera

Basic Settings of IP Camera

Basic Settings

  1. Go to Configuration->Basic Settings
In this section, it primarily provides shortcuts to the main menu including: Time, Users, TCP/IP, Audio, Video, System and Maintenance. The users can click the icons to access the configuration page quickly.

Mobile P2P QR Code

  1. Go to Configuration->Basic Settings->P2P
In this section, P2P ID can be used to manually enter the camera’s information on a mobile or tablet device in case the QR code scanning feature does not work properly.
  1. P2P Online status shows the P2P connection status, there are online or offline status.
  2. QR code is shown for the user to add it into the mobile APP by scanning it using the APP built-in scanner.
Info
🧙Tips: unbonding will be required to bont another device.




    • Related Articles

    • Image Settings of IP Camera

      Image Go to Configuration->Video & Audio->Image Settings->Image Explanation Output mode: This dropdown box allows the user to select four predefined output mode and one custom mode. User can change the below setting under custom mode: Saturation: ...

    • Image Settings of IP Camera

      In this section, it allows users to set output mode and display settings. Please see below for an explannation of them: Output Mode Click to select the following modes: Modes Description Standard Default image settings Bright Bright video mode Vivid ...

    • Local Settings of IP Camera

      Local Settings Go to Configuration->Storage->Local Settings Explanation Live Record field: allows the user to select where to save live recordings to. Click the Browse button to select a different destination folder. Live Snapshot field: allows the ...

    • Video Settings of IP Camera

      In this section, it allows users to change video settings for the live view. Please see below for an explanation of them: Aspect Ratio This button allows users to switch the display aspect ration in its set resolution. 1X: Original size of the stream ...

    • TCP/IP of IP Camera

      Network Status Go to Configuration->Network->TCP/IP->Tab "Network Status" The tab shows the current network status of the camera including the IPV4, IPV6 and Wireless network status. Below is a screenshot of the Network status tab: TCP/IP Go to ...