How to Configure Intrusion Detection on IP Cameras | ExVist Support

Intrusion Detection of IP Camera

Basic Settings

  1. Go to Configuration->Event->Intrusion Detection->Basic Settings
This tab allows the user to modify basic settings. Below is a screenshot of the Basic settings tab:

Explanation

Live stream of the video is shown in the detection area. The user can draw the security zone from the beginning to define the detected zone which will be the security zone, and will detect if the people come into.

To designate a zone, click and drag the mouse over the area desired. The area is enabled for intrusion detection when a colored box is displayed over the live feed.
  1. Sensitivity is the amount of change required to increase the motion detected by a percentage. The lower the sensitivity, the more movement is required to trigger an alarm. 
  2. Scene mode: This dropdown box allows the user to select indoor, outdoor.
  3. Direction: This dropdown box allowes the user to select which direction like enter, left, both.
  4. Clear: Clicking the clear button to clear the settings.
  5. Restore Default: Restore the values to default setting. 
  6. Refresh: Refresh the display of the settings’ value. 
  7. Save: Save the settings.

Schedule

  1. Go to Configuration->Event->Intrusion Detection->Schedule
This tab allows the user to modify intrusion detection schedule settings. Below is a screenshot of intrusion detection schedule settings tab.

Explanation

  1. 7*24 Hour: This checkbox allows the user to enable the motion detection working on 7*24 hours mode. 
  2. Schedule: This checkbox allows the user to enable the motion detection on the specified schedule. If Schedule is selected, then click and drag on time bar for the desired date. To edit multiple days at once, drag the cursor further up or down to cover the other days. 
  3. Setup: Clicking this button opens a screen that allows for recording periods to be set for each day and for each recording type. There is a total of 6 periods that can be set. 
  4. Disable: This checkbox allows the user to disable the motion detection functionality.
  5. Restore Default: Restore the values to default setting. 
  6. Refresh: Refresh the display of the settings’ value. 
  7. Save: Save the settings.

Action

  1. Go to Configuration->Event->Intrusion Detection->Action
This tab allows the user to modify detection action settings. Below is a screenshot of action settings tab.

Explanation

  1. Alarm output: This checkbox allows the user to enable the camera to send the alarm notification output when a motion detection alarm is triggered. 
  2. Record: This checkbox allows the user to enable the camera to record video when a motion detection alarm is triggered. 
  3. FTP: This checkbox allows the user to enable the camera to upload the video and snapshot to the FTP server when a motion detection alarm is triggered. 
  4. Send Email: This checkbox allows the user to enable the camera to send an email when a motion detection alarm is triggered. 
  5. Snapshot: This checkbox allows the user to enable the camera to take a snapshot when a motion detection alarm is triggered. 
  6. Audio out: This checkbox allows the user to enable the camera to activate speaker sounds when a motion detection alarm is triggered. 
  7. Notify the event server: This checkbox allows the user to enable the camera to send the alarm notification to the specified event server when a motion detection alarm is triggered. 
  8. Restore Default: Restore the values to default setting. 
  9. Refresh: Refresh the display of the settings’ value. 
  10. Save: Save the settings.

    • Related Articles

    • Motion Detection of IP Camera

      Detection Zone Go to Configuration->Event->Motion Detection->Detection Zone This tab allows the user to modify detection zone settings. Below is a screenshot of the Detection zone tab: Explanation Enable: This checkbox enables detection zone settings ...

    • Human Detection of IP Camera

      Basic Settings Go to Configuration->Event->Human Detection->Basic Settings This tab allows the user to modify basic settings. Below is a screenshot of the Basic settings tab: Explanation Confidence: This field allows the user to set the confidence ...

    • Line-Crossing Detection of IP Camera

      Basic Settings Go to Configuration->Event->Line-Crossing Detection->Basic Settings This tab allows the user to modify basic settings. Below is a screenshot of the Basic settings tab: Explanation Sensitivity is the amount of change required to ...

    • Abnormality of IP Camera

      Network Disconnection Go to Configuration->Event->Abnormality->Network Disconnection This tab allows the user to set the camera’s response to a Network disconnection related abnormality. Below is a screenshot of the Network disconnection tab screen: ...

    • PIR of IP Camera

      Schedule Go to Configuration->Event->PIR->Schedule This tab allows the user to modify PIR schedule settings. Below is a screenshot of schedule settings tab. Explanation 7*24 Hour: This checkbox allows the user to enable the motion detection working ...