WiFi | HDMI Codec

WiFi of Codec

Configure WiFi

  1. Go to Setting-->Network-->WiFi-->Double Click Trusted SSID 
  2. Enter correct password to SSID and Click “Save” 
  3. Refresh and Link Status will be shown “Connected” below which means it’s already connected to WiFi. If disconnected, please try it again or check whether MAC address of this encoder is in the whitelist of your router.

Info
🧙TIPS:
  1. SSID name, which is the network name for a wireless network, should only contain numbers and English letters. If non-standard characters or symbols are used, it may lead to connection issues.
  2. Additionally, the encoder needs to be rebooted by unplugging the Ethernet cable and powering it off. This suggests that the encoder requires a full reboot in order to properly activate the WiFi functionality.



    • Related Articles

    • Quick Start of Codec

      Connection Diagram Power on encoder and connect it to router via ethernet cable NOTE: At the very beginning, it's strongly recommended to follow this instructions to connect the encoder, especially for network segment issues. If it's failed to be ...

    • FAQs: WiFi of Codec

      Why is it failed to connect to WiFi? To troubleshoot the issue, you can try following steps: Ensure that the SSID (WiFi network name) consists of a combination of alphabets in English and numbers only. Double-check if the password entered for the ...

    • Introduction of Codec

      EXVIST Encoder & Decoder What's HDMI encoder? An HDMI encoder is a device that takes an HDMI input signal and converts it into a digital format that is suitable for transmission over a network. This process usually involves compressing the video and ...

    • Audio of Codec

      Audio Go to Setting->Video/Audio->Audio Item Description Channel CH1~CH4 Audio input HDMI or Line-in(3.5mm only) Or Audio Mix Samples 48000 Codec type G.711A/G.711U/AAC; AAC should be enabled by default if it's needed to push live video to YouTube, ...

    • FAQs: Channel of Codec

      SS50 MS7 Codec Series What is the decoding capacity of this codec in terms of channels? This codec can decode a maximum of four channels, which can be configured as 2x USB camera and 2x network streams, or 1x USB camera and 3x network streams, or ...