FAQs: Port Mapping for HDMI Codecs | Exvist Support

FAQs: Port Mapping of Codec

What's Port Mapping?

Here's how port mapping typically works:
  1. External Request: When an external client attempts to connect to a specific service, such as a web server, exvist codec, or other networked application hosted within a private network, it sends a request to the router's external IP address and a specific port. For example, a web browser accessing a website hosted on a home server.
  2. Port Forwarding: If port mapping is set up on the router, the router will receive the incoming request on the specified port and then forward it to the internal IP address of the specific device like exvist codec running the service within the local network.
  3. Internal Response: The networked device within the local network receives the forwarded request and processes it by serving the requested content, hosting the game server, or responding to the networked application.
Port mapping is essentially a way to facilitate the routing of incoming network traffic from the router's public-facing IP address to the appropriate device or server within the private network, based on the specified port numbers.

Port mapping can be configured using the router's configuration interface, where you can define specific mappings that specify the incoming port, the destination IP address and port within the local network, and the protocol being used (e.g., TCP or UDP).

Overall, port mapping is a fundamental networking technique that allows external clients to access services or resources hosted within a private network.

What's HTTP port?

An HTTP port refers to a network port used specifically for communicating with web servers via the Hypertext Transfer Protocol (HTTP). In networking, a port is a virtual endpoint for communication in a computer network and is identified by a numerical value. Ports are used to distinguish different types of network traffic and allow multiple network services to run on the same device.

The default port for HTTP is port 80. When a client (such as a web browser) makes an HTTP request to a web server, it typically connects to the server's port 80 to establish a communication channel and send or receive web pages, files, or other resources.

In addition to the default HTTP port 80, HTTPS (HTTP over SSL/TLS) uses port 443 for secure communication.

It's worth noting that non-standard HTTP ports, such as 8080, 8000, and others, can also be used for various purposes, including testing, development, and alternative server setups.

In summary, an HTTP port is the specific network port used for exchanging data between client web browsers and web servers via the Hypertext Transfer Protocol.

What's RTSP port?

The default port for RTSP (Real Time Streaming Protocol) is 554. This port is used for establishing and controlling the delivery of streaming media, including audio and video, over a network. When setting up a media server or configuring network devices for RTSP streaming, this default port is used for communication between the server and client devices.

In some cases, when setting up RTSP streaming, you may need to do port mapping (also known as port forwarding) to allow external clients or devices to access the RTSP stream from outside the local network. Port mapping involves forwarding incoming network traffic from a specific port on the router to a designated device or server within the local network.

If you need to do port mapping for RTSP streaming, you'll want to ensure that traffic to port 554 on your external IP address is forwarded to the internal IP address and port of the server hosting the RTSP stream.

Here's a general overview of how to set up port mapping for RTSP streaming:
  1. Access Your Router's Configuration Interface: Open a web browser and log in to your router's configuration interface using the router's IP address. This is typically achieved by entering "http://192.168.1.1" or a similar address into the browser's address bar and providing the router's login credentials.
  2. Locate Port Forwarding or NAT Settings: Within the router's configuration interface, look for the port forwarding or NAT (Network Address Translation) settings. The location and labeling of these settings can vary among different router models, but they are typically found under the "Advanced" or "Security" sections of the router's configuration interface.
  3. Set Up Port Mapping for RTSP: Create a port forwarding rule to map incoming traffic on port 554 (the default port for RTSP) to the internal IP address and port of the server hosting the RTSP stream. Specify the internal IP address of the server and set the internal and external port to 554. Save the port mapping settings.
  4. Test the RTSP Stream: Once the port mapping is set up, external clients can now access the RTSP stream using the external IP address and port 554. Test the RTSP stream from an external device to ensure that the port mapping is functioning as intended.
It's important to note that the exact steps for setting up port mapping may vary depending on your router's make and model. Be sure to consult your router's documentation or manufacturer's support resources for specific instructions on configuring port forwarding for RTSP or any other streaming protocols.

How can we remotely access the codec if do port mapping?

When remotely accessing an codec (such as a video codec) from outside the local network, port mapping (or port forwarding) may be necessary to establish the connection. However, whether port mapping is required for a specific application, such as accessing the codec's HTTP port or RTSP port, depends on the network configuration and the specific requirements of the codec.

Here are some considerations for remotely accessing an codec and the usage of port mapping for HTTP and RTSP ports:
  1. Remote Access to codec: If you need to access the codec remotely, you typically need to configure the network to allow external access to the codec's specific ports. This may involve setting up port mapping on the router to forward incoming traffic from the external IP address to the internal IP address of the codec.
  2. HTTP Port and RTSP Port: Many video codecs use HTTP for web-based administration interfaces and RTSP (Real Time Streaming Protocol) for streaming video. If you need to access the codec's web interface via HTTP or access video streams through RTSP, you may need to set up port mapping for the respective ports used by these services.
  3. Network Configuration: The specific network requirements for accessing the codec may vary based on factors such as the network topology, firewall settings, and the capabilities of the codec itself. It's important to consider the security implications of opening specific ports for external access and take precautions to protect the network and the device.
  4. Protocols and Security: When enabling external access to an codec's HTTP port or RTSP port through port mapping, it's crucial to ensure that the appropriate security measures, such as strong authentication and encryption, are in place to protect the communications and prevent unauthorized access.
In conclusion, while port mapping may be necessary for remotely accessing an codec's HTTP and RTSP ports, the specific requirements and configurations will depend on the network setup and security considerations. It's advisable to carefully plan and implement remote access solutions while prioritizing security and access control.

Learn more about HTTP & RTSP of Codec

  1. HTTP of Codec | RTSP of Codec

    • Related Articles

    • Quick Start of Codec

      Connection Diagram Power on encoder and connect it to router via ethernet cable NOTE: At the very beginning, it's strongly recommended to follow this instructions to connect the encoder, especially for network segment issues. If it's failed to be ...

    • FAQs: HTTP of Codec

      HTTP Port What's HTTP port? An HTTP port refers to a network port used specifically for communicating with web servers via the Hypertext Transfer Protocol (HTTP). In networking, a port is a virtual endpoint for communication in a computer network and ...

    • FAQs: RTSP of Codec

      RTSP Authentication How can we enable Authentication for RTSP on an HDMI Codec? To enable authentication for RTSP on your HDMI codec: Navigate to Settings -> Network -> RTSP. Check the checkbox labeled Authentication. Once authentication is enabled: ...

    • FAQs: Channel of Codec

      SS50 MS7 Codec Series What is the decoding capacity of this codec in terms of channels? This codec can decode a maximum of four channels, which can be configured as 2x USB camera and 2x network streams, or 1x USB camera and 3x network streams, or ...

    • FAQs: Log of Codec

      Print Log via Serial Port Connection Diagram HW: MC6630-CODEC_V2 HW: SS524-CODEC_V2 SERIAL PORT OF SS524-CODEC_V2 Wire Connection Diagram Procedure of Print Log 1. Download driver of CP2102 from the following link CP210x_Drivers 2. Install driver of ...