Comprehensive Guide to IPC Playback: Review and Control Camera Footage | Network Camera

Playback of IP Camera

Click “Playback” button and come to playback the records in SD card if the camera supports and has SD card installed.
Item
Description
Video window
The records will be playing in this window.
Searching window
When there’s records, the Date will be marked as blue automatically, and select the date, and then click “search” to search the records of the day.
Playback Control Bar
Click on the “playback control bar” to select different time to play, and enable or disable audio during playback or full screen.
Timeline
The time-line shows the record playing progress, and you can select different position for the record to play from.
There are two kinds of records, one is scheduled records with“Blue” color and alarm records with “Red” color.



    • Related Articles

    • FAQs: RTMP of IP Camera

      RTMP Protocol What's RTMP? RTMP stands for Real-Time Messaging Protocol. It is a streaming protocol developed by Adobe Systems for transmitting audio, video, and data over the internet in real-time. RTMP is commonly used for live streaming and ...

    • Basic Settings of IP Camera

      Basic Settings Overview The Basic Settings page serves as a shortcut center for the most frequently used camera configurations, such as time synchronization, user accounts, and network parameters. It allows users to quickly access these settings ...

    • General of IP Camera

      General Overview The General Settings page provides basic device identification and core feature configuration options. Here you can customize the camera's display name and control the Mobile P2P remote access feature. Configuration Options Settings ...

    • CGI & Postman User Guide of Network Camera

      Overview This guide explains the generic workflow for interacting with your network camera’s CGI interface using Postman. The same method applies to any CGI‑based configuration – audio, video, network, events, PTZ, etc. If you are looking for a ...

    • Quick Start: Connect to AView Mobile App for Network Camera

      ⏱️ Before You Start PoE Camera: Power on and wait ~5 minutes before scanning the QR code to ensure P2P ID is ready. WiFi Camera (AP mode): Power on only (no Ethernet cable). Wait ~1 minute for SSID HSIPC-XXXXXX to appear. If not visible, press and ...