PTZ Control of IP Camera
In this section, the functions bar allows the user to perform different functions while in live mode. Please see the following images for an explanation of the different features available:
PTZ Control
Click these buttons to control the PTZ camera Left/Right, Upper/Down, Left-Upper/Right-Down, Right-Upper/Left-Down.
🧙Tips: The controls only affect PTZ Camera.
Zoom In/Out
Press and hold to zoom in and out on the motorized camera and PTZ camera lens.
Focus +/-
Click to adjust the Focus of the Auto Focus Lens on the motorized camera or PTZ camera.
IRIS +/-
Click to adjust IRIS open bigger or smaller on PTZ camera.
Lens Initialization
Click to initialize the lens. After initialization, the lens will be focused.
Speed Control
PTZ control speed adjust bar.
Preset
Define the Preset of PTZ or motorized lens camera. Double click on the preset to define the preset and name the preset.
Preset Control
- To call the defined preset;
- To name the preset;
- To delete the preset;
Related Articles
General of IP Camera
General Overview The General Settings page provides basic device identification and core feature configuration options. Here you can customize the camera's display name and control the Mobile P2P remote access feature. Configuration Options Settings ...CGI & Postman User Guide of Network Camera
Overview This guide explains the generic workflow for interacting with your network camera’s CGI interface using Postman. The same method applies to any CGI‑based configuration – audio, video, network, events, PTZ, etc. If you are looking for a ...Basic Settings of IP Camera
Basic Settings Overview The Basic Settings page serves as a shortcut center for the most frequently used camera configurations, such as time synchronization, user accounts, and network parameters. It allows users to quickly access these settings ...Quick Start: Connect to AView Mobile App for Network Camera
⏱️ Before You Start PoE Camera: Power on and wait ~5 minutes before scanning the QR code to ensure P2P ID is ready. WiFi Camera (AP mode): Power on only (no Ethernet cable). Wait ~1 minute for SSID HSIPC-XXXXXX to appear. If not visible, press and ...TCP/IP of IP Camera
Network Status Go to Configuration->Network->TCP/IP->Tab "Network Status" The tab shows the current network status of the camera including the IPV4, IPV6 and Wireless network status. Below is a screenshot of the Network status tab: TCP/IP Go to ...