How to Use Live View for IP Cameras: A Complete Guide | Network Camera

Live View of IP Camera

The Live view tab allows the user to see a live video feed from the camera. There're 5 main sections for the Live View Tab shown as below:

Section One

In this section, the live view tab shows the picture that the camera is broadcasting. The time stamp is shown in the top left corner, the camera name is shown in the middle top of the window. These OSD can be customized in Configuration -> Video & Audio -> OSD.

    • Related Articles

    • TCP/IP of IP Camera

      Network Status Go to Configuration->Network->TCP/IP->Tab "Network Status" The tab shows the current network status of the camera including the IPV4, IPV6 and Wireless network status. Below is a screenshot of the Network status tab: TCP/IP Go to ...

    • Quick Start via IPCManager for IP Camera

      Connection Diagram Power on IP Camera and connect it to router via ethernet cable. Tips: At the very beginning, it's strongly recommended to follow this instructions to connect the camera, especially for network segment issues. Download & Install ...

    • Quick Start of UI for IP Camera

      Connection Diagram Power on IP Camera and connect it to router via ethernet cable. Tips: At the very beginning, it's strongly recommended to follow this instructions to connect the camera, especially for network segment issues. Download & Install ...

    • RTSP of IP Camera

      RTSP Go to Configuration->Network->RTSP This tab allows the user to modify the settings for RTSP including RTSP authentication, and RTSP multicasting. Muti-cast is a feature that enables the camera to broadcast its live view to multiple computers on ...

    • FAQs: RTMP of IP Camera

      What's RTMP? RTMP stands for Real-Time Messaging Protocol. It is a streaming protocol developed by Adobe Systems for transmitting audio, video, and data over the internet in real-time. RTMP is commonly used for live streaming and interactive ...