Master IPC Function Bars: Enhance Your Live View Experience | Network Camera

Function Bars of IP Camera

In this section, it allows users to perform different camera functions with these function bars while in live mode. Please see below for an explanation of the different functions available:

Close/Open Audio

Click this button to close or open the speaker from the PC side. If someone is speaking from camera side, the user can click this button to open it, and hear the voice from the camera.
Info
🧙Tips: It's for  cameras which have built-in microphone feature only.

Close/Open Microphone

Click this button to close or open the microphone from the PC side. The user can use a microphone from the PC to talk through the camera.
Info
🧙Tips: It's for cameras which have two-way audio feature only.

Snapshot

Click this button to take a screenshot of the live feed. The picture is saved here:
Internet Explorer: at the path specified in Configuration->Storage->Local settings->Live snapshot path. 
Other browsers: The snapshot will prompt the user to save it.

Manual Record

Click this button to manually record video. The video is saved at the path specified in Configuration -> Storage -> Local settings ->Live record path.

Digital Zoom

Click this button to activate the zone selection function. This allows the user to use the mouse to select a zone to zoom in with.

Full Screen

This button allows the user to make the live feed go into full screen mode. Double click the mouse or click the ESC button to exit full screen mode.

    • Related Articles

    • Basic Settings of IP Camera

      Basic Settings Overview The Basic Settings page serves as a shortcut center for the most frequently used camera configurations, such as time synchronization, user accounts, and network parameters. It allows users to quickly access these settings ...

    • General of IP Camera

      General Overview The General Settings page provides basic device identification and core feature configuration options. Here you can customize the camera's display name and control the Mobile P2P remote access feature. Configuration Options Settings ...

    • CGI & Postman User Guide of Network Camera

      Overview This guide explains the generic workflow for interacting with your network camera’s CGI interface using Postman. The same method applies to any CGI‑based configuration – audio, video, network, events, PTZ, etc. If you are looking for a ...

    • Quick Start: Connect to AView Mobile App for Network Camera

      ⏱️ Before You Start PoE Camera: Power on and wait ~5 minutes before scanning the QR code to ensure P2P ID is ready. WiFi Camera (AP mode): Power on only (no Ethernet cable). Wait ~1 minute for SSID HSIPC-XXXXXX to appear. If not visible, press and ...

    • TCP/IP of IP Camera

      Network Status Go to Configuration->Network->TCP/IP->Tab "Network Status" The tab shows the current network status of the camera including the IPV4, IPV6 and Wireless network status. Below is a screenshot of the Network status tab: TCP/IP Go to ...