How to Disable IR LEDs and Enable White Light on EXVIST IP Camera – Full Guide

FAQs: Image Settings of Network Camera

Q1: How to Turn Off IR LED & Enable White Light on Network Camera?

Answer: Follow these exact steps to disable the infrared (IR) LEDs and switch to white light illumination on your EXVIST IP camera (this works for the EXVIST 3MP POE Dual Light Bullet Camera and similar models):
  1. Log in to the camera’s web interface using your administrator credentials.
  2. Go to the Configuration tab.
  3. Navigate to Video & Audio → Image Settings.
  4. Scroll to the Day/Night section.
  5. Locate the Lighting Control dropdown menu.
  6. Select “White Light Mode” from the list (instead of “IR Mode” or “Auto”).
  7. Enable the “White Light On Mode” toggle (this turns on the visible white LEDs for color night vision).
  8. Save the settings – the change takes effect immediately.
Notes
Verify the change: Check the camera’s front LEDs (you should see white light, not red glow) and view the live feed to confirm full‑color night vision.

Video Tutorial of Turning Off IR LED & Enabling White Light