Device Manager of IP Camera
What's Device Manager?
As for network camera, IPCManager is just one tool designed for below but not limited:
- Searching cameras in the attached network;
- Quickly modifying IP addresses in batch;
- Upgrading the latest firmware for cameras in batch;
- Restoring the camera to the default factory settings;
- Rebooting the camera;
🧙Tips: Usually it's only designed for the above but not limited features.
Download Device Manager
| Device Manager Version |
Suitable for
|
|
Windows
|
|
|
MAC
|
|
|
Windows
|
|
|
Windows
|
|
|
MAC
|
Install Device Manager
- Right click the application and run as administrator;
- Select the corresponding language from the drop-down list (English, Polish, Russian, Japanese, German, Simplified Chinese, Traditional Chinese are available for Windows. Only English for MAC version.)
- Click Next-->Next-->Install
Quick Start of Device Manager
Download & Install ActiveX
Download ActiveX from the following link if you don't have:
🧙Tips: It's strongly recommended for you to install the above ActiveX and then restart your PC to make it valid. Later it should be easier for you to preview live video feed from basically all browsers.
Related Articles
FAQs: Login of IP Camera
Why is it failed to access the IP Camera from Google Chrome? The failure to access the IP camera from Google Chrome or IPCManager/Device Manager, even when using the default username and password, may be related to network configuration issues. ...Upgrade Firmware for IP Camera
Upgrade firmware via IPCManager Only Run IPCManager if you already installed it Enter username and password Go to Firmware Upgrading-->Add Online IPC Select the encoder and Browse the latest firmware Click "Upgrade" and it will start upgrading ...TCP/IP of IP Camera
Network Status Go to Configuration->Network->TCP/IP->Tab "Network Status" The tab shows the current network status of the camera including the IPV4, IPV6 and Wireless network status. Below is a screenshot of the Network status tab: TCP/IP Go to ...FAQs: WiFi of IP Camera
How can I set up my security camera to connect to WiFi? Follow these detailed steps to connect your camera to a WiFi network: 1. Connect the Camera to Your Router Use a LAN cable to connect your camera directly to your router. Ensure the router is ...FAQs: TCP/IP of IP Camera
What is network segment? In the context of IP addressing, a network segment often refers to a range of IP addresses that share the same network prefix or subnet mask. This means that devices within the same network segment can communicate directly ...