Video of IP Camera
Video
- Go to Configuration->Video & Audio->Video
Explanation
- Encode Type: This dropdown box allows the user to select a compression protocol.
- Resolution: This dropdown box allows the user to set the resolution.
- Profile: This dropdown box allows the user to set the profile.
- Frame Rate (FPS): This dropdown box allows the user to select a frame rate. Frame rate settings are measured in frames per second (FPS), and can range from 1f/s to 25f/s in PAL mode and 1f/s to 30f/s in NTSC mode.
- Bit Rate Type: This dropdown box allows the user to select a bit rate type. The system supports two bit rate types: CBR and VBR. In VBR mode, video quality can be set.
- Reference bit rate: This is the recommended bit rate value according to the resolution and frame rate selected. • Bit Rate: This dropdown box allows the user to select a bit rate.
- Encode quality: This function allows the user to select the image encode quality.
- Key frame interval: This field allows the user to set the P frame amount between two I frames. The value ranges from 1 to 150 seconds. Default value is 50. Recommended value is frame rate *2.
- Restore Default: Restore the values to default setting.
- Refresh: Refresh the display of the settings’ value.
- Save: Save the settings.
🧙Tips: Sub Stream is the lower quality stream that allows the feed to take up less resources and bandwidth when streaming. The Main Stream and the Sub Stream have the same fields.
Related Articles
Video Settings of IP Camera
In this section, it allows users to change video settings for the live view. Please see below for an explanation of them: Aspect Ratio This button allows users to switch the display aspect ration in its set resolution. 1X: Original size of the stream ...Snapshot of IP Camera
Snapshot Go to Configuration->Video & Audio->Snapshot Explanation Quality: This dropdown box allows the user to select image quality. Quality is adjusted on a scale of 1-7. Frame rate: This dropdown box allows the user to select the MJPEG frame rate. ...VoIP of IP Camera
VoIP Go to Configuration->Network->VoIP VoIP stands for Voice over Internet Protocol. This technology is used to transmit the IP video and voice between the VoIP server and the cameras. Below is a snapshot of VoIP tab. Explanation Enable: This ...Device Manager of IP Camera
What's Device Manager? As for network camera, IPCManager is just one tool designed for below but not limited: Searching cameras in the attached network; Quickly modifying IP addresses in batch; Upgrading the latest firmware for cameras in batch; ...Upgrade Firmware for IP Camera
Upgrade firmware via IPCManager Only Run IPCManager if you already installed it Enter username and password Go to Firmware Upgrading-->Add Online IPC Select the encoder and Browse the latest firmware Click "Upgrade" and it will start upgrading ...