How to Configure Snapshot Settings on IPC Cameras: Capture & Save Images | Network Camera

Snapshot of IP Camera

Snapshot

  1. Go to Configuration->Video & Audio->Snapshot

Explanation

  1. Quality: This dropdown box allows the user to select image quality. Quality is adjusted on a scale of 1-7. 
  2. Frame rate: This dropdown box allows the user to select the MJPEG frame rate. Frame rate is adjusted from 1-5 FPS. 
  3. Interval: This is to set snapshot frequency. The value ranges from 1 to 600 seconds. 
  4. Stream: This dropdown box allows the user to select a snapshot of the stream: mainstream or substream. 
  5. MJPEG-HTTP: it shows the MJPEG-HTTP streame URL. For testing object, the user can use the example URL like the below if the user did not login the camera’s web interface: http://192.168.1.120/action/stream?subject=mjpeg&user=admin&pwd=12345
  6. Snapshot URL: it shows the MJPEG snapshot HTTP URL. Normally the user need use the example URL like below if the user did not login the web interface: http://192.168.1.120/action/snap?cam=0&user=admin&pwd=12345. The IP address, User and Password showing in the above URL are factory default. Please use IPC's current IP address, user name and password to replace the content.
  7. Restore Default: Restore the values to default setting. 
  8. Refresh: Refresh the display of the settings’ value. 
  9. Save: Save the setting.

    • Related Articles

    • VoIP of IP Camera

      VoIP Go to Configuration->Network->VoIP VoIP stands for Voice over Internet Protocol. This technology is used to transmit the IP video and voice between the VoIP server and the cameras. Below is a snapshot of VoIP tab. Explanation Enable: This ...

    • Abnormality of IP Camera

      Network Disconnection Go to Configuration->Event->Abnormality->Network Disconnection This tab allows the user to set the camera’s response to a Network disconnection related abnormality. Below is a screenshot of the Network disconnection tab screen: ...

    • PIR of IP Camera

      Schedule Go to Configuration->Event->PIR->Schedule This tab allows the user to modify PIR schedule settings. Below is a screenshot of schedule settings tab. Explanation 7*24 Hour: This checkbox allows the user to enable the motion detection working ...

    • IP Filter of IP Camera

      IP Filter Go to Configuration->Security->IP Filter This screen allows for the filtering of IP addresses, either blocking them, or granting them access to the camera. This feature helps make the camera more secure by limiting remote access only to ...

    • TCP/IP of IP Camera

      Network Status Go to Configuration->Network->TCP/IP->Tab "Network Status" The tab shows the current network status of the camera including the IPV4, IPV6 and Wireless network status. Below is a screenshot of the Network status tab: TCP/IP Go to ...