How to Configure ROI (Region of Interest) Settings on IP Cameras | Network Camera

ROI of IP Camera

ROI

  1. Go to Configuration->Video & Audio->ROI
For ROI, the radio button enables or disables the feature. 

To set a ROI area, click one of the boxes in the live view window, and position or resize it as needed. To remove all regions of interested boxes, click the clear button. Maximum 4 areas can be set.

    • Related Articles

    • Model Comparison of Network Camera

      Bullet | 2x LED | Fixed Lens Series Part Number ZSC8PSH16F ZSC8WSH16F ZSC5PSH16F ZSC5WSH16F ZSC3PSH16F ZSC3WSH16F Type 4K(8MP) PoE 4K(8MP) WiFi 5MP PoE 5MP WiFi 3MP PoE 3MP WiFi Light Mode IR or Dual Light(IR+WARM) Dual Light(IR+WARM) Resolution ...

    • Basic Settings of IP Camera

      Basic Settings Overview The Basic Settings page serves as a shortcut center for the most frequently used camera configurations, such as time synchronization, user accounts, and network parameters. It allows users to quickly access these settings ...

    • General of IP Camera

      General Overview The General Settings page provides basic device identification and core feature configuration options. Here you can customize the camera's display name and control the Mobile P2P remote access feature. Configuration Options Settings ...

    • CGI & Postman User Guide of Network Camera

      Overview This guide explains the generic workflow for interacting with your network camera’s CGI interface using Postman. The same method applies to any CGI‑based configuration – audio, video, network, events, PTZ, etc. If you are looking for a ...

    • Quick Start: Connect to AView Mobile App for Network Camera

      ⏱️ Before You Start PoE Camera: Power on and wait ~5 minutes before scanning the QR code to ensure P2P ID is ready. WiFi Camera (AP mode): Power on only (no Ethernet cable). Wait ~1 minute for SSID HSIPC-XXXXXX to appear. If not visible, press and ...