Privacy Mask of IP Camera
Privacy Mask
- Go to Configuration->Video & Audio->Privacy Mask
For Privacy Masking, the radio button enables or disables the feature.
To set a privacy mask, click one of the boxes in the live view window, and position or resize it as needed. To remove all privacy filter boxes, click the clear button. Maximum 4 areas can be set.
Related Articles
Basic Settings of IP Camera
Basic Settings Overview The Basic Settings page serves as a shortcut center for the most frequently used camera configurations, such as time synchronization, user accounts, and network parameters. It allows users to quickly access these settings ...General of IP Camera
General Overview The General Settings page provides basic device identification and core feature configuration options. Here you can customize the camera's display name and control the Mobile P2P remote access feature. Configuration Options Settings ...CGI & Postman User Guide of Network Camera
Overview This guide explains the generic workflow for interacting with your network camera’s CGI interface using Postman. The same method applies to any CGI‑based configuration – audio, video, network, events, PTZ, etc. If you are looking for a ...Quick Start: Connect to AView Mobile App for Network Camera
⏱️ Before You Start PoE Camera: Power on and wait ~5 minutes before scanning the QR code to ensure P2P ID is ready. WiFi Camera (AP mode): Power on only (no Ethernet cable). Wait ~1 minute for SSID HSIPC-XXXXXX to appear. If not visible, press and ...TCP/IP of IP Camera
Network Status Go to Configuration->Network->TCP/IP->Tab "Network Status" The tab shows the current network status of the camera including the IPV4, IPV6 and Wireless network status. Below is a screenshot of the Network status tab: TCP/IP Go to ...