How to Configure Audio Settings on IPC Cameras: Audio Input & Output Setup | Network Camera

Audio of IP Camera

Audio

  1. Go to Configuration->Video & Audio->Audio

Explanation

  1. Enable audio: This checkbox allows the user to enable Audio functionality.
  2. Audio codec format: This dropdown box allows the user to select the Audio codec format type. The current camera supports G.711A, G.711U, AAC etc. audio format. 
  3. Audio in: This field allows the user to select the input type of the audio if the camera supports two kinds of audio input including line in and mic in. otherwise it will be automatically selected, the user cannot change it. 
  4. Sampling rate: This field allows the user to select the audio sampling rate.
  5. Input volume: This adjustment bar allows the user to adjust the volume of the input audio. 
  6. Output volume: This adjustment bar allows the user to adjust the volume of the output audio. 
  7. Restore Default: Restore the values to default setting. 
  8. Refresh: Refresh the display of the settings’ value. 
  9. Save: Save the settings

    • Related Articles

    • Snapshot of IP Camera

      Snapshot Go to Configuration->Video & Audio->Snapshot Explanation Quality: This dropdown box allows the user to select image quality. Quality is adjusted on a scale of 1-7. Frame rate: This dropdown box allows the user to select the MJPEG frame rate. ...

    • Basic Settings of IP Camera

      Basic Settings Go to Configuration->Basic Settings In this section, it primarily provides shortcuts to the main menu including: Time, Users, TCP/IP, Audio, Video, System and Maintenance. The users can click the icons to access the configuration page ...

    • FAQs: RTMP of IP Camera

      What's RTMP? RTMP stands for Real-Time Messaging Protocol. It is a streaming protocol developed by Adobe Systems for transmitting audio, video, and data over the internet in real-time. RTMP is commonly used for live streaming and interactive ...

    • Abnormality of IP Camera

      Network Disconnection Go to Configuration->Event->Abnormality->Network Disconnection This tab allows the user to set the camera’s response to a Network disconnection related abnormality. Below is a screenshot of the Network disconnection tab screen: ...

    • Quick Start of UI for IP Camera

      Connection Diagram Power on IP Camera and connect it to router via ethernet cable. Tips: At the very beginning, it's strongly recommended to follow this instructions to connect the camera, especially for network segment issues. Download & Install ...