How to Upgrade IPC Firmware Using Device Manager: Step-by-Step Guide | Network Camera

Upgrade of IP Camera

Upgrade

  1. Go to Configuration->System->Upgrade
This menu allows the user to upgrade the camera’s firmware. Below is a screenshot of the Upgrade screen:

NOTES

  1. There is model number notifications automatically, please make sure you have the right firmware before you start the upgrade process.
  2. To search the PC for the firmware file, click the Browse button. Click Upgrade button to start the upgrade process once the firmware is selected.
  3. When upgrading the camera’s firmware, do not disconnect the connection or power from the camera.
Info
🧙Tips: Normally it's strongly recommended to upgrade firmware via IPCManager.

    • Related Articles

    • Upgrade Firmware for IP Camera

      Upgrade firmware via IPCManager Only Run IPCManager if you already installed it Enter username and password Go to Firmware Upgrading-->Add Online IPC Select the encoder and Browse the latest firmware Click "Upgrade" and it will start upgrading ...

    • Basic Settings of IP Camera

      Basic Settings Overview The Basic Settings page serves as a shortcut center for the most frequently used camera configurations, such as time synchronization, user accounts, and network parameters. It allows users to quickly access these settings ...

    • General of IP Camera

      General Overview The General Settings page provides basic device identification and core feature configuration options. Here you can customize the camera's display name and control the Mobile P2P remote access feature. Configuration Options Settings ...

    • CGI & Postman User Guide of Network Camera

      Overview This guide explains the generic workflow for interacting with your network camera’s CGI interface using Postman. The same method applies to any CGI‑based configuration – audio, video, network, events, PTZ, etc. If you are looking for a ...

    • Quick Start: Connect to AView Mobile App for Network Camera

      ⏱️ Before You Start PoE Camera: Power on and wait ~5 minutes before scanning the QR code to ensure P2P ID is ready. WiFi Camera (AP mode): Power on only (no Ethernet cable). Wait ~1 minute for SSID HSIPC-XXXXXX to appear. If not visible, press and ...