How to Configure FTP Settings for IPC Cameras | EXVIST Support

FTP of IP Camera

FTP

  1. Go to Configuration->Storage->FTP

Explanation

  1. Server Address: This field allows the user to designate a DDNS address or IP address of the FTP server. 
  2. Port: This field allows the user to designate the FTP server’s port number. 
  3. User Name: This field allows the user to input the username used to log into the FTP server. 
  4. Password: This field allows the user to input the password used to log into the FTP server.
  5. Remote path: This field allows the user to specify a remote directory on the FTP to send the recorded media to. 
  6. Breakpoint resume: This dropdown box allows the user to enable or disable FTP upload breakpoint resume functionality. 
  7. Restore Default: Restore the values to default setting. 
  8. Test FTP: Test the FTP setting. 
  9. Save: Save the settings.

    • Related Articles

    • Abnormality of IP Camera

      Network Disconnection Go to Configuration->Event->Abnormality->Network Disconnection This tab allows the user to set the camera’s response to a Network disconnection related abnormality. Below is a screenshot of the Network disconnection tab screen: ...

    • IP Filter of IP Camera

      IP Filter Go to Configuration->Security->IP Filter This screen allows for the filtering of IP addresses, either blocking them, or granting them access to the camera. This feature helps make the camera more secure by limiting remote access only to ...

    • TCP/IP of IP Camera

      Network Status Go to Configuration->Network->TCP/IP->Tab "Network Status" The tab shows the current network status of the camera including the IPV4, IPV6 and Wireless network status. Below is a screenshot of the Network status tab: TCP/IP Go to ...

    • PIR of IP Camera

      Schedule Go to Configuration->Event->PIR->Schedule This tab allows the user to modify PIR schedule settings. Below is a screenshot of schedule settings tab. Explanation 7*24 Hour: This checkbox allows the user to enable the motion detection working ...

    • Schedule of IP Camera

      In this section, you're learn how to change recording Schedule settings. Record Go to Configuration->Storage->Schedule->Record This tab is where the user can change Record parameter settings. Below is a screenshot of the record tab in Schedule menu. ...