How to Set Up IPC IO Alarm for Your IP Camera | Network Camera Configuration

I/O Alarm of IP Camera

I/O Alarm

  1. Go to Configuration->Event->I/O Alarm->I/O Alarm
This tab allows the user to modify I/O Alarm parameter settings. Below is a screenshot of the I/O Alarm tab:

Explanation

  1. Trigger level: This dropdown box allows the user to select the input alarm level: low or high. 
  2. Alarm output level: This dropdown box allows the user to select the output alarm level from the camera: low or high. 
  3. Restore Default: Restore the values to default setting. 
  4. Refresh: Refresh the display of the settings’ value. 
  5. Save: Save the settings

Schedule

  1. Go to Configuration->Event->I/O Alarm->Schedule
This tab allows the user to modify I/O alarm schedule settings. Below is a screenshot of schedule settings tab.

Explanation

  1. 7*24 Hour: This checkbox allows the user to enable the motion detection working on 7*24 hours mode. 
  2. Schedule: This checkbox allows the user to enable the motion detection on the specified schedule. If Schedule is selected, then click and drag on time bar for the desired date. To edit multiple days at once, drag the cursor further up or down to cover the other days. 
  3. Setup: Clicking this button opens a screen that allows for recording periods to be set for each day and for each recording type. There is a total of 6 periods that can be set. 
  4. Disable: This checkbox allows the user to disable the motion detection functionality.
  5. Restore Default: Restore the values to default setting. 
  6. Refresh: Refresh the display of the settings’ value. 
  7. Save: Save the settings.

Action

  1. Go to Configuration->Event->I/O Alarm->Action
This tab allows the user to modify detection action settings. Below is a screenshot of action settings tab.

Explanation

  1. Alarm output: This checkbox allows the user to enable the camera to send the alarm notification output when a motion detection alarm is triggered. 
  2. Record: This checkbox allows the user to enable the camera to record video when a motion detection alarm is triggered. 
  3. FTP: This checkbox allows the user to enable the camera to upload the video and snapshot to the FTP server when a motion detection alarm is triggered. 
  4. Send Email: This checkbox allows the user to enable the camera to send an email when a motion detection alarm is triggered. 
  5. Snapshot: This checkbox allows the user to enable the camera to take a snapshot when a motion detection alarm is triggered. 
  6. Audio out: This checkbox allows the user to enable the camera to activate speaker sounds when a motion detection alarm is triggered. 
  7. Notify the event server: This checkbox allows the user to enable the camera to send the alarm notification to the specified event server when a motion detection alarm is triggered. 
  8. Restore Default: Restore the values to default setting. 
  9. Refresh: Refresh the display of the settings’ value. 
  10. Save: Save the settings.

    • Related Articles

    • IP Filter of IP Camera

      IP Filter Go to Configuration->Security->IP Filter This screen allows for the filtering of IP addresses, either blocking them, or granting them access to the camera. This feature helps make the camera more secure by limiting remote access only to ...

    • TCP/IP of IP Camera

      Network Status Go to Configuration->Network->TCP/IP->Tab "Network Status" The tab shows the current network status of the camera including the IPV4, IPV6 and Wireless network status. Below is a screenshot of the Network status tab: TCP/IP Go to ...

    • Abnormality of IP Camera

      Network Disconnection Go to Configuration->Event->Abnormality->Network Disconnection This tab allows the user to set the camera’s response to a Network disconnection related abnormality. Below is a screenshot of the Network disconnection tab screen: ...

    • PIR of IP Camera

      Schedule Go to Configuration->Event->PIR->Schedule This tab allows the user to modify PIR schedule settings. Below is a screenshot of schedule settings tab. Explanation 7*24 Hour: This checkbox allows the user to enable the motion detection working ...

    • Disk of IP Camera

      Disk Go to Configuration->Storage->Disk Explanation Status field shows the status of the current storage the camera is using. Formatted shows the storage formatting status: Unformatted, or formatted. Usage status shows the diagram of the storage ...