Quick Start of Router V519

Quick Start of Router V519

Connection

Correctly insert SIM card and power on the router with DC12V adapter.

Configure IP for PC

Before accessing the router from browsers, it’s recommended for you to set your PC as “Obtain an IP address automatically” and “Obtain DNS server address automatically”, then it will get an IP address automatically by router. If you would like to set one assigned address for your PC, it’s necessary to set it in the same network segment of LAN0 of router (the default IP address for LAN0: 192.168.8.1, subnet mask: 255.255.255.0).

Connected to WiFi

Check whether there’s WiFi hotspot started with V519-XXXXXX(SSID), then click “connect” and enter password (87654321 by default) to establish wireless connection

Confirm whether PC is well connected to the router

After obtaining IP address, please execute PING command to double confirm whether PC is well connected to the router. Take Windows as example: WIN+R ->Enter “cmd” -> Enter “ping 192.168.8.1”, if it’s shown like the below photo, then it means the PC is well connected to the router:

Access router from browser

  1. Start a browser like Chrome, Firefox, Edge etc.
  2. Enter http://192.168.8.1 in the address column
  3. Enter username and password (admin by default) and it’s shown as below:
  1. After login, you will be able to configure and manage this router

    • Related Articles

    • Device of Router V519

      Device In this section, it allows the user to change the operation mode and language. Please check below details: Operation Mode 5x operation modes can be selected: LTE Gateway (By Default), Gateway, 2.4G WISP, AP, Mix. Please see below photo: LTE ...

    • Uninittab of Router V519

      Uninittab In this section, it allows the user to configure close port when powering off the router, but it's not recommended to do that because it's for debugging only. Please check below details:

    • Dashboard of Router V519

      Dashboard In this section, it allows the user to check status of router which you can easily see whether it's connected to the Internet successfully. Please check below details: Click the registered courier and you will see the detailed information ...

    • Auto Reboot of Router V519

      Auto Reboot In this section, it allows the user to set reboot mode. The router will run slowly for a long time. To prevent router failure, it is recommended to set the router to automatically restart. The default factory setting is idle restart, and ...

    • Interfaces of Router V519

      Hardware Interfaces Front Side RJ45 Jack: LAN0 RJ45 Jack: LAN1 DC Jack: DC7V~35V wide voltage, DC12V is better and recommended. ?Tips: 1) LAN0 can be used as WAN under regular router mode; 2) DC: 2.1mm Standard Round Interface, 7V~35V, Internal:+ ...