V519EG25G Datasheet | LTE Router

Datasheet of V519EG25G

Brief Introduction

Thank you so much for purchasing our 4G LTE industrial routers. V519-industrial 3G/4G router-adopts high performance 32-bit processor, high speed process protocol and large data, equipped with multiply 3G/4G industrial modules(WCDMA/EVDO/TD-SCDMA/FDD-LTE/TDD-LTE), provides 10/100M adaptive ethernet port, WiFi wireless port, serial port, integrated with multiply terminal devices,easy to do configuration via WEB and remote control.

Features

  1. Wide Voltage Input DC7V-35V With Auto Power-Off Protection;
  2. Site Control, Port Mapping, DMZ Host etc.;
  3. IEEE 802.11 b/gn, Max. Transmission Rate: 300Mbps;
  4. Wireless Video Surveillance and Dynamic Image Transmission Supported;
  5. CDMA, WCDMA, GSM, TD-SCDMA, EVDO, TDD-LTE, FDD-LTE etc. Supported;
  6. Serial Port, TCP/UDP Pass-Through Data Transmission and AT Command Interactive Transmission;
  7. Cloud Control, Auto Upgrade Supported;
  8. VPN, VPDN, PPTP Client, L2TP Client Supported
  9. Auto Network Detection, Dial Failure Auto Reboot, Timing Reboot etc. Supported;
  10. Wired Connection, 4G Network Backup, Auto Switch Between Wired Connection & 4G Network;
  11. Hardware & Software Watchdog Crashproof Design, Running Stably;

Hardware Interfaces

Front Side

  1. RJ45 Jack: LAN0 
  2. RJ45 Jack: LAN1
  3. DC Jack: DC7V~35V wide voltage, DC12V is better and recommended.
🧙Tips: 1) LAN0 can be used as WAN under regular router mode; 2) DC: 2.1mm Standard Round Interface, 7V~35V, Internal:+ (Positive), Outside: - (Negative).

Back Side

  1. 3G/4G/WIFI Antenna: SMA external rotation internal hole interface. 
  2. RESET: press for >5s when it’s powered on, SYS indicator will flash quickly and it’ll reboot. Then all settings will be reset to the default factory settings. 
  3. Serial Port: 4PIN PH2.0mm, GND/TX/RX/DC+ from left to right, DC+ can be used power supply to power on the router.
  4.  SIM card slot: Self-locking slot, press the white button on your left side and it will pop out.

Description for Serial Port

  1. From left to right: GND | TX | RX | DC+
Currently UART1 can only be used as RS232, it’s GND/TX/RX/DC+ from left to right. But for data transmission, only GND/TX/RX will be used, respectively connecting them to the 5PIN, 2PIN, 3PIN of computer’s serial port to establish serial communication. DC+ works as input and output connector of power supply. (E.g.: when input is 12V, then the output voltage is 12V too.)

Description for Antenna Port

There’re three SMA antenna ports, that is 3G/4G and 2x WiFi antenna ports. Users can select the appropriate antennas. Theoretically, the higher gain the antenna has, the better transmitting and receiving effect of WiFi it will be. For 3G/4G antenna, it’s recommended to use 3-5dB antenna. But for WiFi antenna, it depends on your requirement and coverage and supports max. 15dB.

Indicators

Name
Status
Description
SYS
Indicator On
Powered and connected properly
SYS
Flash Quickly
Abnormal connection; 3G/4G Dialing;
Press "Reset" for >5s and it'll flash quickyly, then the router will reboot;
3G/4G
Green
Connected successfully, good signal
3G/4G
Red
Connected successfully, bad signal
3G/4G
Off
Failed to connect to 3G/4G module or abnormal
LAN0/1
On
RJ45 is connected
LAN0/1
Off
RJ45 is out of connection

Operation Band

LTE CAT4
EG25-G LCC
Region
Global
LTE-FDD
B1/B2/B3/B4/B5/B7/B8/B12/B13/
B18/B19/B20/B25/B26/B28
LTE-TDD
B38/B39/B40/B41
WCDMA
B1/B2/B4/B5/B6/B8/B19
GSM/EDGE
B2/B3/B5/B8
GNSS
GPS/GLONASS/BeiDou (Compass)/
Galileo/QZSS (Optional)
Carrier
Europe: Deutsche Telekom
America: Verizon/AT&T/U.S. Cellular
Canada: Telus/Rogers*
🧙TIPS: For more information of EG25-G, please click and download Quectel EG25-G Specification or refer to article Datasheet of EG25-G Series.

Specification

Part Number
Parameters of WiFi
Basics
Max. Transmission Rate: 300Mbps.
Working Band: 2.4GHz.
Wireless Mode(Option): 11b/g/n/, 11bg mixed , 11bam mixed (Def).
Wireless Mode(Option): 11a/n on1y 11an mixed(Def).
SSID Broadcast Switch Supported.
Quantity of Users
30x WiFi Users Connected Simultaneously Supported.
200x Users via Ethernet Cable Connected Simultaneously Supported.
Safety Parameters
Support WPA(Individual)/WPA2(Individual)/WPA-Mixed(Individual).
Support TKIP/AES/Auto Encryption Algorithm.
Transmission Distance
Outdoor Without Barriers Up to 200 Meters.
Parameters of System
GPU
Industrial High Performance Embedded MIPS CPU, main frequency 580Mhz.
MMU
With MMU memory management unit built-in CPU, it can prevent system abnormality caused by memory spilling.
FLASH
128 Mbits, have enough memory to store program and data.
DDR2
1024 Mbits, have enough cache to improve arithmetic speed of system.
Parameters of Interfaces
WAN 
1x 10/100M adaptive WAN port, isolation built-in, auto flip supported (Auto, MDI, MDIX), PPOE supported.
Serial Port 
RS232
Indicators
4x Indicators.
Antenna Port
3x Antenna Ports, Standard SMA Antenna Port.
USIM Slot
1x SIM Slot
Power Port
Standard DC connector.
Parameters of Power
Input Voltage
Wide voltage designed, DC7-35V, adapter can power it on directly and it has buit-in power reverse and over-voltage/current protection.
Adapter
DC12V 1.5A
Communication Current
<300mA
Standby Current
<150mA
Other Parameters
Case
Adopt metal case, anti-radiation/interference, safe isolation between case and system, lightningproof, applicable for serious conditions.
Outline Dimension
82mm*82mm*24mm(3.2in*3.2in*0.9in)
Package Dimension
250mm*170mm*75mm(9.8in*6.7in*2.9in)
Weight
394g(0.87lb, 13.9oz)
Operation Temperature
-40°C~+85°C(-40°F~+185°F)
Storage Temperature
-50°C~+95°C(-58°F~+203°F)
Humidity
95% (Non-Condensing)
Typical Application(WiFi Covered Application)
Finance 
Center monitoring, mobile stock transaction and info inquiry;
Communication
Power environment monitoring, electric circuit information inquiry;
Traffic
GPRS, SMS, GPS vehicle monitoring and dispatch, banknote transport monitoring, school bus monitorning;
Power
Power system realtime dynamic monitoring and auto compensation;
Heat
Heating system real-time monitoring and maintenance;
Police
Vehicles of police station, 911 and traffic police monitoring and dispatch
Security mobile data inquiry like(ID verification, wanted, child lost information etc.)
Mobile traffic communication data inquiry like licence plate etc.;
Work Site
Mobile work management, other outdoor staff mobile data inquiry;
Weather
Data collection & transmission
Charge
Charging station monitoring & management, data transmission;
Water Resource 
Quantity of water monitoring and transmission;
Life
Real-time gas data colection and automatic control, water station real-time monitoring and maintenance;
Scenic Area
WiFi covered, wireless network ads pushing and devices management;
Hotel
WiFi covered, wireless network ads pushing and device management;
Package Contents
1x 4G Industrial Wireless Router
1x 4G Antenna
2x WiFi Antenna
1x Power Adapter
1x GPS Antenna(Optional)

    • Related Articles

    • FAQs: Upgrade of LTE Router V519

      LTE Router Upgrade Procedure via Telnet (Forced Upgrade Method) Download Toolkit LTE Router Upgrade Procedure via Telnet (Forced Upgrade Method) Preparation Steps: 1. Assign the IP address 192.168.8.10 to your computer. 2. Disable the firewall on ...
    • Interfaces of Router V519

      Hardware Interfaces Front Side RJ45 Jack: LAN0 RJ45 Jack: LAN1 DC Jack: DC7V~35V wide voltage, DC12V is better and recommended. ?Tips: 1) LAN0 can be used as WAN under regular router mode; 2) DC: 2.1mm Standard Round Interface, 7V~35V, Internal:+ ...