Manager Server of Router V519
Manager Server
In this section, it allows the user to configure parameters of remote management server. After configuration, the router can be connected to the remote server, through remote server, it’s okay to configure the router. But for remote management server, the customized integration protocol will be required. Please contact your seller for more details. Please check below details:
Related Articles
Telnet Server of Router V519
Telnet Server In this section, it allows the user to enable or disable Telnet server and Remote Telnet server. Please check below details:Quick Start of Router V519
Connection Correctly insert SIM card and power on the router with DC12V adapter. Configure IP for PC Before accessing the router from browsers, it’s recommended for you to set your PC as “Obtain an IP address automatically” and “Obtain DNS server ...LTE GPS of Router V519
LTE GPS In this section, it allows the user to set LTE GPS. LTE GPS is one of optional features because it uses the GPS built-in the 4G modules. If it’s required to enable GPS, please go to Network-->LTE-->GPS and enable GPS. If it positions ...Device of Router V519
Device In this section, it allows the user to change the operation mode and language. Please check below details: Operation Mode 5x operation modes can be selected: LTE Gateway (By Default), Gateway, 2.4G WISP, AP, Mix. Please see below photo: LTE ...Uninittab of Router V519
Uninittab In this section, it allows the user to configure close port when powering off the router, but it's not recommended to do that because it's for debugging only. Please check below details: