Configure of Router V519

Configure

In this section, it allows the user to backup the configuration or reset it to the default configuration. Please check below details:

• Related Articles

• Uninittab of Router V519

  Uninittab In this section, it allows the user to configure close port when powering off the router, but it's not recommended to do that because it's for debugging only. Please check below details:

• Manager Server of Router V519

  Manager Server In this section, it allows the user to configure parameters of remote management server. After configuration, the router can be connected to the remote server, through remote server, it’s okay to configure the router. But for remote ...

• Quick Start of Router V519

  Connection Correctly insert SIM card and power on the router with DC12V adapter. Configure IP for PC Before accessing the router from browsers, it’s recommended for you to set your PC as “Obtain an IP address automatically” and “Obtain DNS server ...

• LTE of Router V519

  LTE In this section, it allows the user to configure LTE. By default, it’s LTE Gateway mode for V519, just inserting 4G/3G SIM card, later router will auto recognize and register to corresponding network of 4G/3G. You can also configure and select ...

• Device of Router V519

  Device In this section, it allows the user to change the operation mode and language. Please check below details: Operation Mode 5x operation modes can be selected: LTE Gateway (By Default), Gateway, 2.4G WISP, AP, Mix. Please see below photo: LTE ...