Traffic Reference of Router V519
Traffic Reference
In this section, it allows the user to switch on or off status. After setting the global traffic reference, the reference traffic will be shared by stations when the traffic is sufficient. Please check below details:
Related Articles
Station Traffic Control of Router V519
Station Traffic Control In this section, it allows the user to control the traffic for the assigned device connected to this router including download and upload. Please check below details:Default Traffic Control of Router V519
Default Traffic Control In this section, it allows the user to configure the traffic control. Configure a default traffic for each station that does not set traffic control separately. Please check below details:LTE of Router V519
LTE In this section, it allows the user to configure LTE. By default, it’s LTE Gateway mode for V519, just inserting 4G/3G SIM card, later router will auto recognize and register to corresponding network of 4G/3G. You can also configure and select ...Device of Router V519
Device In this section, it allows the user to change the operation mode and language. Please check below details: Operation Mode 5x operation modes can be selected: LTE Gateway (By Default), Gateway, 2.4G WISP, AP, Mix. Please see below photo: LTE ...Uninittab of Router V519
Uninittab In this section, it allows the user to configure close port when powering off the router, but it's not recommended to do that because it's for debugging only. Please check below details: