LTE of Router V519

LTE of Router V519

LTE

In this section, it allows the user to configure LTE. By default, it’s LTE Gateway mode for V519, just inserting 4G/3G SIM card, later router will auto recognize and register to corresponding network of 4G/3G. You can also configure and select ISP. Please check below details:

Attach Mode

  1. It's okay to lock 4G/3G/2G, but it's recommended to select "Auto" mode.

Maintain Network Mode

  1. Lock 4G or 4G/3G; Disable by default.

Custom APN

Please enter the APN information provided by ISP. The APN information of the domestic three ISPs in China for your reference as below:
ISP
3G/4G
APN
Dial Number
User
Password
China Mobile
TD-LTE, TD-SCDMA, GSM
cmnet
*99#
blank
blank
China Unicom
FDD-LTE, WCDMA, GSM
3gnet
*99#
blank
blank
China Telecom 4G
FDD-LTE
ctnet
*99#
card
card
China Telecom 3G/2G
CDMA200, EVDO
ctnet
#777
card
card

Dial Mode

  1. It's recommended to select "Advise" mode. Once failed to dial or abnormal, it's suggested to select "PPP" mode. But for other modes, it's not recommended.

Availability Check

  1. When enabled, it will check whether network is normal in the light of data packets. If abnormal, it will dial again. Therefore, it's strongly recommended to enable it.

GPS

  1. Used to enable or disable GPS here. Disable by default.