LAN of Router V519

LAN

In this section, it allows the user to modify the gateway, subnet mask and enable or disable DHCP server. By default, the gateway is 192.168.8.1. Please check below details:

• Related Articles

• Device of Router V519

  Device In this section, it allows the user to change the operation mode and language. Please check below details: Operation Mode 5x operation modes can be selected: LTE Gateway (By Default), Gateway, 2.4G WISP, AP, Mix. Please see below photo: LTE ...

• Interfaces of Router V519

  Hardware Interfaces Front Side RJ45 Jack: LAN0 RJ45 Jack: LAN1 DC Jack: DC7V~35V wide voltage, DC12V is better and recommended. ?Tips: 1) LAN0 can be used as WAN under regular router mode; 2) DC: 2.1mm Standard Round Interface, 7V~35V, Internal:+ ...

• Quick Start of Router V519

  Connection Correctly insert SIM card and power on the router with DC12V adapter. Configure IP for PC Before accessing the router from browsers, it’s recommended for you to set your PC as “Obtain an IP address automatically” and “Obtain DNS server ...

• Access Control of Router V519

  Access Control In this section, it allows the use to set access control for LAN. Please check below details:

• Internet Control of Router V519

  Internet Control In this section, it allows the user to set LAN whether it can be connected to the Internet. There're four options like No Setting, Allow, Forbidden, Timing Rule to connec to the Internet. Please check below details: