Firewall of Router V519

Firewall of Router V519

Firewall

In this section, it allows the user to turn on or off firewall here. Please check below details:

    • Related Articles

    • FAQs: Upgrade of LTE Router V519

      LTE Router Upgrade Procedure via Telnet (Forced Upgrade Method) Download Toolkit LTE Router Upgrade Procedure via Telnet (Forced Upgrade Method) Preparation Steps: 1. Assign the IP address 192.168.8.10 to your computer. 2. Disable the firewall on ...

    • Device of Router V519

      Device In this section, it allows the user to change the operation mode and language. Please check below details: Operation Mode 5x operation modes can be selected: LTE Gateway (By Default), Gateway, 2.4G WISP, AP, Mix. Please see below photo: LTE ...

    • Uninittab of Router V519

      Uninittab In this section, it allows the user to configure close port when powering off the router, but it's not recommended to do that because it's for debugging only. Please check below details:

    • Dashboard of Router V519

      Dashboard In this section, it allows the user to check status of router which you can easily see whether it's connected to the Internet successfully. Please check below details: Click the registered courier and you will see the detailed information ...

    • Interfaces of Router V519

      Hardware Interfaces Front Side RJ45 Jack: LAN0 RJ45 Jack: LAN1 DC Jack: DC7V~35V wide voltage, DC12V is better and recommended. ?Tips: 1) LAN0 can be used as WAN under regular router mode; 2) DC: 2.1mm Standard Round Interface, 7V~35V, Internal:+ ...