AP Client of Router V519

AP Client of Router V519

AP Client

In this section, it allows the user to let this router connect to other wireless SSID like the wireless network adapter on your PC.
  1. Switch on 2.4G AP Client;
  2. Click "Scan" and it will pop up all searched SSID for you to select;
  3. Enter the username & password if required and it will be connected to that SSID;
Please check below details:

    • Related Articles

    • OpenVPN Client of Router V519

      OpenVPN Client In this section, it allows the user to configure OpenVPN. But before setting, please try to obtain the related parameters of VPN server first. Please check below details:

    • L2TP Client of Router V519

      L2TP Client In this section, it allows the user to configure L2TP. But before setting, please try to obtain the related parameters of VPN server first. Please check below details:

    • PPTP Client of Router V519

      PPTP Client In this section, it allows the user to configure PPTP. But before setting, please try to obtain the related parameters of VPN server first. Please check below details:

    • Device of Router V519

      Device In this section, it allows the user to change the operation mode and language. Please check below details: Operation Mode 5x operation modes can be selected: LTE Gateway (By Default), Gateway, 2.4G WISP, AP, Mix. Please see below photo: LTE ...

    • Introduction of Router V519

      Brief Introduction Thank you so much for purchasing our 4G LTE industrial routers. V519-industrial 3G/4G router-adopts high performance 32-bit processor, high speed process protocol and large data, equipped with multiply 3G/4G industrial ...