Service of Router V519

Service

In this section, it allows the user to check all enabled services but it's not recommended to do that because it's used for debugging only. Please check below details:

• Related Articles

• Port Map of Router V519

  Port Map In this section, it allows the user to do port mapping so that users on the external network can directly acess the services provided by the internal service through the router's external IP and port. Please check below details: ?Tips: ...

• Device of Router V519

  Device In this section, it allows the user to change the operation mode and language. Please check below details: Operation Mode 5x operation modes can be selected: LTE Gateway (By Default), Gateway, 2.4G WISP, AP, Mix. Please see below photo: LTE ...

• Uninittab of Router V519

  Uninittab In this section, it allows the user to configure close port when powering off the router, but it's not recommended to do that because it's for debugging only. Please check below details:

• Dashboard of Router V519

  Dashboard In this section, it allows the user to check status of router which you can easily see whether it's connected to the Internet successfully. Please check below details: Click the registered courier and you will see the detailed information ...

• Auto Reboot of Router V519

  Auto Reboot In this section, it allows the user to set reboot mode. The router will run slowly for a long time. To prevent router failure, it is recommended to set the router to automatically restart. The default factory setting is idle restart, and ...