LTE GPS of Router V519

LTE GPS of Router V519

LTE GPS

In this section, it allows the user to set LTE GPS. LTE GPS is one of optional features because it uses the GPS built-in the 4G modules. If it’s required to enable GPS, please go to Network-->LTE-->GPS and enable GPS. If it positions successfully, you will see the map below. Please check below details:

GPS Report

It allows users to upload GPS data to the assigned server.

GPS Server

Once enabled, GPS data will be broadcasted via the assigned port. But for the terminal connected to the router, all you have to do is to open the corresponding port to get the GPS information.

    • Related Articles

    • LTE of Router V519

      LTE In this section, it allows the user to configure LTE. By default, it’s LTE Gateway mode for V519, just inserting 4G/3G SIM card, later router will auto recognize and register to corresponding network of 4G/3G. You can also configure and select ...

    • FAQs: Upgrade of LTE Router V519

      LTE Router Upgrade Procedure via Telnet (Forced Upgrade Method) Download Toolkit LTE Router Upgrade Procedure via Telnet (Forced Upgrade Method) Preparation Steps: 1. Assign the IP address 192.168.8.10 to your computer. 2. Disable the firewall on ...

    • LTE Adjust of Router V519

      LTE Adjust In this section, it allows the user to lock the band, cell and other parameters. Please check below details:

    • JT808 GPS Report of Router V519

      JT808 GPS Report In this section, it allows the user to configure JT808 GPS report. Please check below details:

    • Device of Router V519

      Device In this section, it allows the user to change the operation mode and language. Please check below details: Operation Mode 5x operation modes can be selected: LTE Gateway (By Default), Gateway, 2.4G WISP, AP, Mix. Please see below photo: LTE ...