Upgrade Firmware of 4K Extender
Please follow below steps:
- Start a browser like IE, Chrome, Firefox (Chrome Recommended);
- Enter the default IP address: 192.168.1.166(Transmitter), 192.168.1.167(Receiver);
- Go to Tab System Config->System Update->Browse the file->Click"Upgrade"
NOTE: if it's already the latest firmware, then it will prompt you"Software is the newest" after the upgrade process is around 2%. Normally the upgrade process will go to around 18% and then it will upgrade successfully. Or else it's failed to upgrade.
Related Articles
Upgrade Firmware of 1080P Extender
Please follow below steps: Start a browser like IE, Chrome, Firefox (Chrome Recommended); Enter the default IP address: 192.168.1.166(Transmitter), 192.168.1.167(Receiver); Go to Tab System Config->System Update->Browse the file->Click"Upgrade" NOTE: ...FAQs: Troubleshooting & Solutions of 4K Extender
Q1. How do I troubleshoot a black screen on my 4K RX device? If you are experiencing a black screen on your 4K RX device, first check the resolution settings. If the default output resolution is set to 3840x2160p, and the display does not support 4K, ...FAQs: LAN Port of 1080P Extender
What is the function of this LAN port? The function of an Ethernet port (or LAN port) is to connect devices to a local area network (LAN) or the internet. It is commonly used to connect computers, routers, switches, and other networking devices. In ...FAQs: LAN Port of 4K Extender
What is the function of this LAN port? The function of an Ethernet port (or LAN port) is to connect devices to a local area network (LAN) or the internet. It is commonly used to connect computers, routers, switches, and other networking devices. In ...FAQs: Compatibility of 1080P Extender
Why no HDMI output when connecting to DLSR camera, camcorder, TV box etc.? It might be related to the compatibility issue of HDMI and it's strongly recommended to use 1080P instead of 1080i as the output resolution. Please follow below steps: Power ...