4K HDMI Extender Model Comparison | Exvist Support

Model Comparison of 4K Extender

200M 4K HDMI Wireless Transmitter and Receiver

Part Number
ITS4WB SERIES
ITS4WK SERIES
Video Encoding
H.265
Ports of Transmitter
1x HDMI Input, 1x HDMI Output
1x HDMI Input, 1x HDMI Output
Ports of Receiver
1x HDMI Output
1x HDMI Output, 1x VGA Output
KVM
NOT Supported
Supported
Resolution
1920*1080P@60fps
Transmission Distance
Up to 656ft by Wi-Fi Under Open Air
1-to-More Mode
Max. 8x Receivers
Frequency Bands
2.4GHz | 5.8GHz
IR Remote Control
Supported
RTSP Protocol
Available for Transmitter Only
WiFi Channel
Configurable for Transmitter Only
Power Adapter
DC 12V 1A

100M 4K Wireless HDMI Transmitter and Multiple Receiver

Part Number
ITS4EB SERIES
ITS4EK SERIES
Video Encoding
H.265
Ports of Transmitter
1x HDMI Input, 1x HDMI Output
1x HDMI Input, 1x HDMI Output
Ports of Receiver
1x HDMI Output
1x HDMI Output, 1x VGA Output
KVM
NOT Supported
Supported
Switching Output
NOT Supported
Resolution
1920*1080P@60fps
Transmission Distance
Up to 328ft by Wi-Fi Under Open Air
1-to-More Mode
Max. 4x Receivers
Frequency Bands
2.4GHz | 5.8GHz
IR Remote Control
Supported
RTSP Protocol
Available for Transmitter Only
WiFi Channel
Configurable for Transmitter Only
Sets At Site
Max. 2 sets at the same site, or else it might cause channel jam.
Power Adapter
DC 12V 1A


    • Related Articles

    • Model Comparison of 1080P Extender

      200M 1080P Wireless HDMI Transmitter and Receiver Kits Part Number ITS2WB SERIES ITS2WV SERIES ITS2WG SERIES Video Encoding H.265 Ports of Transmitter 1x HDMI Input, 1x HDMI Output 1x HDMI Input, 1x HDMI Output 1x VGA Input, 1x VGA Output Ports of ...

    • FAQs: Troubleshooting & Solutions of 4K Extender

      Q1. How do I troubleshoot a black screen on my 4K RX device? If you are experiencing a black screen on your 4K RX device, first check the resolution settings. If the default output resolution is set to 3840x2160p, and the display does not support 4K, ...

    • Quick Start of 1080p Extender

      Wiring Method Connect HDMI signal source to the port "HDMI IN" of Transmitter; Connect the port "HDMI OUT" of Receiver to the monitor or TV via HDMI cable; Power on Transmitter(TX) & Receiver(RX), After about 40 seconds, the RUN indicator will flash ...

    • FAQs: Troubleshooting & Solutions of 1080P Extender

      Q1. How do I troubleshoot a black screen on my 4K RX device? If you are experiencing a black screen on your 4K RX device, first check the resolution settings. If the default output resolution is set to 3840x2160p, and the display does not support 4K, ...

    • Video Tutorial of 1080P Extender

      Installation Guide of 1080P Wireless HDMI Extender