RTSP of 4K Extender

RTSP of 4K Extender

ONLY available for Transmitter

  1. Power on the transmitter via DC 12V;
  2. Connect it to the switch or router via Ethernet cable;
  3. Or Connect it to your PC via Ethernet cable directly(In this way, it's necessary to add one more network segment to your PC which makes your PC and transmitter are on the same network segment)
  4. Run VLC Player->Media->Open Network Stream->Enter RTSP URL: rtsp://192.168.1.166/ch0/main->Then video can be play successfully on VLC player



    How can we get the RTSP URL correctly?

    Please follow below steps:
    1. Start a browser like IE, Chrome, Firefox (Chrome Recommended);
    2. Enter the default IP address 192.168.1.166 (Make sure they're on the same network segment)
    3. Go to Tab Status Dislay->RTSP, which you can check it below:

      • Related Articles

      • FAQs: Troubleshooting & Solutions of 4K Extender

        Q1. How do I troubleshoot a black screen on my 4K RX device? If you are experiencing a black screen on your 4K RX device, first check the resolution settings. If the default output resolution is set to 3840x2160p, and the display does not support 4K, ...

      • RTSP of 1080P Extender

        ONLY available for Transmitter Power on the transmitter via DC 12V; Connect it to the switch or router via Ethernet cable; Or Connect it to your PC via Ethernet cable directly(In this way, it's necessary to add one more network segment to your PC ...

      • Introduction of 1080p Extender

        Introduction EXVIST 1080P wireless hdmi extender transmitter & receiver, also called image transmission system, is designed for wireless or wired transmission of high definition audio and video signals via HDMI from the audio-visual devices to the ...

      • Quick Start of 1080p Extender

        Wiring Method Connect HDMI signal source to the port "HDMI IN" of Transmitter; Connect the port "HDMI OUT" of Receiver to the monitor or TV via HDMI cable; Power on Transmitter(TX) & Receiver(RX), After about 40 seconds, the RUN indicator will flash ...

      • FAQs: Troubleshooting & Solutions of 1080P Extender

        Q1. How do I troubleshoot a black screen on my 4K RX device? If you are experiencing a black screen on your 4K RX device, first check the resolution settings. If the default output resolution is set to 3840x2160p, and the display does not support 4K, ...