Datasheet of ITS2ES Series
Overview
EXVIST ITS2ES Series 150M 1080P Wireless HDMI Extender+Switcher
The EXVIST Wireless Extender & Switcher offers powerful HD video and audio transmission with support for 1080P at 60FPS. Capable of wirelessly transmitting signals up to 492ft (150 meters), it provides a seamless solution for entertainment venues. This device not only transmits audio and video but also allows for easy switching between video signal outputs.
Key Features:
- High-Definition Video Quality: Supports 1080P at 60FPS for clear and smooth video playback.
- Wireless Transmission: Transmits audio and video signals wirelessly up to 492ft (150 meters), ideal for large spaces.
- Multiple Signal Sources: The receiver side supports one wireless signal and two HDMI input signals, allowing for flexible setup.
- Easy Switching: Switch between video signal sources effortlessly using the included remote control.
Applications:
- Bars and entertainment venues
- KTV rooms, disc players, and jukeboxes
- Ideal for creating efficient signal transmission and switching solutions to enhance the audio-visual experience in entertainment environments.
Hardware
Front/Rear Ports of Transmitter
Front/Rear Ports of Receiver
NOTES: Function Description of RST Button on Receiver (RX):
- Short Press (1 second): Press and hold the RST button for around 1 second to cycle through different output resolutions on the receiver, such as 2160P, 1080P, and 720P.
- Long Press (10 seconds): Press and hold the RST button for more than 5 seconds to restore the receiver to its default factory settings, including the default output resolution.
Advantages
- Dual Transmission: The wireless HDMI extender not only can wirelessly transmit video from transmitter to receiver up to around 492ft (150 meters) under open air conditions, but also transmit video to up to around 656ft (200 meters) through wired connection to switch or router if it's under severe conditions, which efficiently fixes the transmission issue if Wi-Fi is not covered.
- RTSP Protocol: Not only the 1080P HDMI transmitter can be used for sending video to receiver in wireless or wired connection, but also turned into one HDMI video encoder to pull video steam via RTSP protocol and play video via VLC player by entering rtsp://192.168.1.166/cho/main as long as there's one video source input via HDMI.
- Switching Output: The receiver supports three video signals: one wireless signal and two HDMI input signals. Using the remote control, users can easily switch between the available video sources to select the desired output signal.
- Multiple Modes: This set contains 1x transmitter and 1x receiver. If you would like to realize the transmission from 1x transmitter to more receivers, that will be no problem too. All you have to do is to buy more receivers (max. 4pcs), connect the receiver(s) to the transmitter via one single Ethernet cable one by one and get all receiver(s) paired to the transmitter, then multiple modes are realized.
- Higher Compatibility: Both of our video wireless transmitter and receiver are compatible with HDMI 1.4. Basically it works with most of devices with HDMI like TV box, computer, game console, DVD, camcorder, virtual reality(VR), CCTV monitor, projector etc. But for 1080i, it'll be better to switch it from 1080i to 1080P output.
- Reliable Power Supply: In order to ensure a stable power supply, both transmitter and receiver will be equipped with a standard DC12 power interface and are attached with a dedicated power adapter for the monitoring system.
- Plug and Play: True plug and play, there's no need to install any software once received. All you have to do is to connect the video source to the transmitter via HDMI cable and the receiver to the monitor or TV via HDMI cable, power on both transmitter and receiver via DC12V 1A power adapter. Then wait for a while and you will enjoy the video in FHD 1080P@60fps.
Parameters
|
Part Number
|
|
|
Video Encoding
|
H.265
|
| Resolution |
1920*1080P@60fps
|
|
Transmission Distance
|
Up to 492ft by Wi-Fi Under Open Air
|
|
1-to-More Mode
|
Max. 4x Receivers
|
|
Frequency Bands
|
2.4GHz | 5.8GHz
|
|
IR Remote Control
|
Supported
|
|
RTSP Protocol
|
Available for Transmitter Only, rtsp://192.168.1.166/cho/main
|
|
WiFi Channel
|
Configurable for transmitter only, but not recommended because it might shorten the transmission distance.
|
|
Sets At Site
|
Max. 2 sets at the same site, or else it might cause channel jam.
|
|
Power Adapter
|
DC 12V 1A
|
Specification
Connectors
| Item |
Description
|
|
HDMI (1.4)
|
2x HDMI Female(Transmitter)
2x HDMI Female(Receiver)
|
|
RJ45
|
1x RJ45 Female(Transmitter/Receiver)
|
|
IR Control
|
1x 3.5mm IR Female(Transmitter)
1x Built-in IR Receiver
|
|
Antenna
|
2x External WiFi Antennas (Transmitter/Receiver)
|
|
RST
|
1x RST (Reset or press & hold it for 1 second to switch output resolution of RX)
|
|
Power
|
1x DC12(Transmitter/Receiver)
|
Signal Input/Output
| Item |
Description
|
|
Signal Input
|
1x HDMI Input by Transmitter 2x HDMI Input by Receiver
1x IR Input by Receiver (Built-in)
|
|
Signal Output
|
1x HDMI Output by Transmitter
1x HDMI Ouptut by Receiver
1x IR Output by Transmitter
|
|
Max. Transmission Distance
|
Wireless: Up to 492ft (150M) under open air
Wired: Up to 656ft (200M) via switch
|
Video
| Item | Description |
|
Video Encoding
|
H.265
|
|
Video Resolutions
|
Up to 1920x1080P@60fps, 1080i Not Recommended
|
Network
| Item |
Description
|
|
Default IP
|
192.168.1.166 (Transmitter)
192.168.1.167 (Receiver)
|
|
RTSP Protocol
|
Only Availalble for Transmitter
|
|
RTSP URL
|
rtsp://192.168.1.166/ch0/main
|
WiFi
|
Item
|
Description
|
|
Frequency
|
Dual Band, 2.4GHz | 5.8GHz
|
Power
|
Item
|
Description
|
|
Input Voltage
|
AC110V-220V, 50/60HZ
|
|
Output Voltage
|
DC5V/2A
|
|
Consumption
|
≤4.0W(Transmitter/Receiver)
|
Physical
| Item |
Description
|
|
Unit Dimension
|
111 x 79 x 25 mm(4.37 x 3.11 x 0.98 in.)
|
|
Package Dimension
|
194 x 116 x 116 mm(7.64 x 4.57 x 4.57 in.)
|
|
Unit weight(1x unit)
|
189 g (0.42 lb, 6.67 oz.)
|
|
Gross weight(1x TX, 1x RX)
|
670 g(1.5 lb, 23.63 oz.)
|
|
Housing
|
Aluminum alloy
|
|
Color
|
Black
|
Operating Environment
|
Item
|
Description
|
|
Operation Temperature
|
-15℃ ~ 55℃ (5°F ~ 131°F)
|
|
Storage Temperature
|
-40℃~ 60℃ (-40°F ~ 140°F)
|
|
Humidity(Non-Condensing)
|
0-95%
|
Learn more about Model Comparison of 1080P Extender.
Related Articles
Datasheet of ITS4WK Series
Overview EXVIST ITS4WK Series 200M 4K Wireless HDMI Extender Wired KVM Transmitter and Receiver The EXVIST 4K@30FPS HDMI Wireless Extender & KVM Transmitter/Receiver is designed for the wireless or wired transmission of high-definition audio and ...Datasheet of ITS2EB Series
Overview EXVIST ITS2EB Series 100M 1080P Wireless HDMI Extender The EXVIST 1080P Wireless HDMI Extender is an advanced image transmission system designed to deliver high-definition audio and video signals from source devices to displays without the ...Datasheet of ITS2EV Series
Overview EXVIST ITS2EV Series 100M 1080P HDMI Wireless Transmitter and Recevier with VGA Loopout The EXVIST 1080P Wireless HDMI Extender Transmitter and Receiver is an advanced image transmission system designed to deliver high-definition audio and ...Datasheet of ITS2WB Series
Overview EXVIST ITS2WB Series 200M 1080P Wireless HDMI Transmitter and Receiver EXVIST 1080P wireless hdmi extender transmitter & receiver, also called image transmission system, is designed for wireless or wired transmission of high definition audio ...Datasheet of ITS2WG Series
Overview EXVIST ITS2WG Series 200M 1080P Wireless VGA Extender Transmitter & Receiver The EXVIST 1080P Wireless VGA Extender offers a versatile solution for high-definition audio and video transmission. Designed for both wireless and wired ...