GK72 VGA Encoder Pro Series
GK72 MS7 VGA Encoder Pro Series
NOTES:
- Typically the one listed first in the following table is the latest firmware version.
- Once you download the firmware file, you may need to decompress or extract it from its compressed format (e.g., a .zip or .rar file) before you can proceed with the firmware update process. And there're specific firmware files that are designed for different applications: one for CCTV surveillance and another for live broadcasting. It's important to select the appropriate firmware version based on the intended use case, either for CCTV surveillance or live broadcasting, to ensure compatibility and proper functionality for your specific application.
- When updating firmware, especially if you are running a very old version, it may be necessary to upgrade the firmware step by step rather than jumping directly to the latest version. This incremental approach helps to ensure a smooth and successful firmware update process. By upgrading in smaller increments, you reduce the likelihood of compatibility issues or potential conflicts between the very old version and the latest version. This also allows the firmware update to address any specific changes or fixes made in each version, ensuring that your system is fully updated and functioning properly at every stage.
- It's strongly recommended to do upgrading via device manager and it's under wired connection. When upgrading an encoder, it is usually recommended to follow best practices to ensure a smooth and reliable upgrade process. Please refer to article Upgrade Firmware.
- The version number "HDMI_V3.00.52.220921" can be interpreted as indicating that the firmware version was released on September 21st, 2022.
- "V3.00.52" indicates the major, minor, and patch version numbers of the firmware.
- "220921" represents the release date, with "22" for the year 2022, "09" for the month of September, and "21" for the 21st day of the month.
|
Firmware Version
|
Remark
|
|
OSD & Audio Optimized
|
Learn more about Upgrade Firmware
Related Articles
Datasheet of ON-VGA-16EP
Overview EXVIST H.265 1080P 60FPS PoE VGA Encoder with VGA Loopout for Live Streaming ON-VGA-16EP is designed for industrial use with built-in PoE module which enables users to power it on directly via just one Ethernet cable as long as it's ...Datasheet of ON-AHD-16EM
Overview EXVIST ON-AHD-16EM – 1080P AHD Encoder w/SD Card & Multi-Protocol Streaming The EXVIST ON-AHD-16EM is a compact embedded AHD encoder that converts analog AHD video (up to 1080p@60fps) into H.265/H.264 network streams. It supports ...FAQs: Download Firmware for Encoder
How can we access the page of download firmware? It's only visible for our registered users. The reason why you are unable to access the page to download the firmware is likely because EXVIST Cares requires users to register and log in before you can ...Introduction of Encoder
What's HDMI Video Encoder? An HDMI video encoder is a device or hardware component that is designed to convert video and audio signals from HDMI sources, such as cameras, gaming consoles, or other video playback devices, into digital formats that can ...Audio of Encoder
Audio Go to Setting->Video/Audio->Audio Item Description Audio input HDMI or Line-in(3.5mm only) Or Audio Mix Samples 48000 Codec type G.711A/G.711U/AAC; AAC should be enabled by default if it's needed to push live video to YouTube, or else it might ...