MC30 ITE Encoder Series
MC30 ITE Encoder Series
NOTE:
- Typically the one listed first in the following table is the latest firmware version.
- Once you download the firmware file, you may need to decompress or extract it from its compressed format (e.g., a .zip or .rar file) before you can proceed with the firmware update process. And there're specific firmware files that are designed for different applications: one for CCTV surveillance and another for live broadcasting. It's important to select the appropriate firmware version based on the intended use case, either for CCTV surveillance or live broadcasting, to ensure compatibility and proper functionality for your specific application.
- When updating firmware, especially if you are running a very old version, it may be necessary to upgrade the firmware step by step rather than jumping directly to the latest version. This incremental approach helps to ensure a smooth and successful firmware update process. By upgrading in smaller increments, you reduce the likelihood of compatibility issues or potential conflicts between the very old version and the latest version. This also allows the firmware update to address any specific changes or fixes made in each version, ensuring that your system is fully updated and functioning properly at every stage.
- It's strongly recommended to do upgrading via device manager and it's under wired connection. When upgrading an encoder, it is usually recommended to follow best practices to ensure a smooth and reliable upgrade process. Please refer to article Upgrade Firmware.
- The version number "HDMI_V3.00.52.220921" can be interpreted as indicating that the firmware version was released on September 21st, 2022.
- "V3.00.52" indicates the major, minor, and patch version numbers of the firmware.
- "220921" represents the release date, with "22" for the year 2022, "09" for the month of September, and "21" for the 21st day of the month.
|
Firmware Version
|
Remark |
|
Kernel Optimized
|
|
|
HDMI Output 1920*1200@60HZ Supported
|
|
|
HDMI Output 1920*1200@60HZ Supported
|
|
|
Kernel Optimized
|
|
|
Kernel Optimized
|
|
|
Kernel Optimized
|
|
|
Audio Optimized
|
|
|
Recording Optimized
|
|
|
ONVIF Authentication Added, Milestone Optimized
|
|
|
H.265 Preview Optimized
|
|
|
RTSP Push/Audio Mix Added
|
|
|
RTSP Push/Audio Mix Added
|
|
|
RTSP Push/Audio Mix Added
|
|
|
N/A
|
|
|
HTTPS/RTMPS/RTSP AUTHENTICATION etc.
|
|
|
Auto Reboot Added
|
|
|
PNG of PICTURE OSD Optimized, Max. 800*800; But it should be inside of image 1920*1080P for XY;
|
|
|
N/A
|
|
|
N/A
|
|
|
Compatibility with iVMS-4200 Optimized.
|
|
|
N/A
|
|
|
N/A
|
|
|
N/A
|
|
|
N/A
|
|
|
N/A
|
|
|
N/A
|
|
|
N/A
|
|
|
N/A
|
WARNING
- If the encoder has "firmware related to MC30 ITE Encoder Series", it can indeed be upgraded with "firmware to TV30 ITE Codec Series". However, after the upgrade, the original authorization will become invalid, requiring further authorization and additional charges.
- If the encoder has "firmware related to TV30 ITE Codec Series," it cannot be upgraded with other firmwares related to "MC30 ITE Encoder Series".
Related Articles
FAQs: Download Firmware for Encoder
How can we access the page of download firmware? It's only visible for our registered users. The reason why you are unable to access the page to download the firmware is likely because EXVIST Cares requires users to register and log in before you can ...FAQs: Maintain/Upgrade of Encoder
Can we upgrade firmware directly through UI? Upgrading firmware directly through the user interface (UI) of an encoder is generally NOT RECOMMENDED, due to the potential risks associated with the process. Firmware upgrades can significantly impact ...FAQs: System Info of Encoder
How can we tell when the firmware was released? The firmware version number often contains information that indicates when it was released. For example, "V3.00.52.220921," the information can be interpreted as follows: "V3.00.52" comprises the main ...Upgrade firmware for Encoder
Upgrade Firmware via Device Manager Open the file folder of EncDevice Double click "EncDeviceTool.exe" and then it will work Click "Refresh" -->Enter username and password at the right bottom side; Select the device-->Enter Start IP & IP ...Device Manager of Encoder
What is the Device Manager? The Device Manager is a tool for managing EXVIST encoder decoder in your local area network, it's just designed for below features: Searching encoders in the attached network; Quickly modifying IP addresses in batch; ...