GK72 MS7 Encoder Series
GK72 MS7 Encoder Series
Only available for the models ON-DMI-16E, ON-DMI-16EW, ON-DMI-16EP, ON-DMI-16EM. The serial numbers are started with GKE2023.
NOTE:
- Typically the one listed first in the following table is the latest firmware version.
- Once you download the firmware file, you may need to decompress or extract it from its compressed format (e.g., a .zip or .rar file) before you can proceed with the firmware update process. And there're specific firmware files that are designed for different applications: one for CCTV surveillance and another for live broadcasting. It's important to select the appropriate firmware version based on the intended use case, either for CCTV surveillance or live broadcasting, to ensure compatibility and proper functionality for your specific application.
- When updating firmware, especially if you are running a very old version, it may be necessary to upgrade the firmware step by step rather than jumping directly to the latest version. This incremental approach helps to ensure a smooth and successful firmware update process. By upgrading in smaller increments, you reduce the likelihood of compatibility issues or potential conflicts between the very old version and the latest version. This also allows the firmware update to address any specific changes or fixes made in each version, ensuring that your system is fully updated and functioning properly at every stage.
- It's strongly recommended to do upgrading via device manager and it's under wired connection. When upgrading an encoder, it is usually recommended to follow best practices to ensure a smooth and reliable upgrade process. Please refer to article Upgrade Firmware.
- The version number "HDMI_V3.00.52.220921" can be interpreted as indicating that the firmware version was released on September 21st, 2022.
- "V3.00.52" indicates the major, minor, and patch version numbers of the firmware.
- "220921" represents the release date, with "22" for the year 2022, "09" for the month of September, and "21" for the 21st day of the month.
|
Firmware Version
|
Remark
|
|
Audio Optimized
|
|
|
Recording Optimized
|
|
|
ONVIF Authentication Added, Milestone Optimized
|
|
|
H.265 Preview Optimized
|
|
|
RTSP Push Added, Optimized
|
|
|
RTSP Push Added, Optimized
|
|
|
RTSP Push Added
|
|
|
Detection of HDMI Signal Optimized
|
|
| N/A | |
|
N/A
|
Related Articles
Introduction of Encoder
What's HDMI Video Encoder? An HDMI video encoder is a device or hardware component that is designed to convert video and audio signals from HDMI sources, such as cameras, gaming consoles, or other video playback devices, into digital formats that can ...Quick Start of Encoder
Connection Diagram Power on encoder and connect it to router via ethernet cable NOTE: At the very beginning, it's strongly recommended to follow this instructions to connect the encoder, especially for network segment issues. If it's failed to be ...Upgrade firmware
Upgrade Firmware via Device Manager Open the file folder of EncDevice Double click "EncDeviceTool.exe" and then it will work Click "Refresh" -->Enter username and password at the right bottom side; Select the device-->Enter Start IP & IP ...Device Manager
What is the Device Manager? The Device Manager is a tool for managing EXVIST encoder decoder in your local area network, it's just designed for below features: Searching encoders in the attached network; Quickly modifying IP addresses in batch; ...Audio
Audio Go to Setting->Video/Audio->Audio Item Description Audio input HDMI or Line-in(3.5mm only) Or Audio Mix Samples 48000 Codec type G.711A/G.711U/AAC; AAC should be enabled by default if it's needed to push live video to YouTube, or else it might ...