GK72 ITE Encoder Series
GK72 ITE Encoder Series
Only available for the models ON-DMI-16E, ON-DMI-16EW, ON-DMI-16EP, ON-DMI-16EM. The serial numbers are started with GKE2022 or GTE2024.
NOTE:
- Typically the one listed first in the following table is the latest firmware version.
- Once you download the firmware file, you may need to decompress or extract it from its compressed format (e.g., a .zip or .rar file) before you can proceed with the firmware update process. And there're specific firmware files that are designed for different applications: one for CCTV surveillance and another for live broadcasting. It's important to select the appropriate firmware version based on the intended use case, either for CCTV surveillance or live broadcasting, to ensure compatibility and proper functionality for your specific application.
- When updating firmware, especially if you are running a very old version, it may be necessary to upgrade the firmware step by step rather than jumping directly to the latest version. This incremental approach helps to ensure a smooth and successful firmware update process. By upgrading in smaller increments, you reduce the likelihood of compatibility issues or potential conflicts between the very old version and the latest version. This also allows the firmware update to address any specific changes or fixes made in each version, ensuring that your system is fully updated and functioning properly at every stage.
- It's strongly recommended to do upgrading via device manager and it's under wired connection. When upgrading an encoder, it is usually recommended to follow best practices to ensure a smooth and reliable upgrade process. Please refer to article Upgrade Firmware.
- The version number "HDMI_V3.00.52.220921" can be interpreted as indicating that the firmware version was released on September 21st, 2022.
- "V3.00.52" indicates the major, minor, and patch version numbers of the firmware.
- "220921" represents the release date, with "22" for the year 2022, "09" for the month of September, and "21" for the 21st day of the month.
| Firmware Version | Remark |
|
Kernel Optimized
|
|
|
Automatic recording after power on
|
|
|
Automatic recording after power on
|
|
|
Kernel Optimized
|
|
|
Kernel Optimized
|
|
|
Audio Optimized
|
|
|
Recording Optimized
|
|
|
ONVIF Authentication Added, Milestone Optimized
|
|
|
H.265 Preview Optimized
|
|
|
RTSP Push Added, Optimized
|
|
|
N/A
|
|
|
HTTPS/RTMPS/RTSP AUTHENTICATION etc.
|
|
|
HTTPS/RTMPS Added
|
|
|
Auto Reboot Added
|
|
|
PNG of PICTURE OSD optimized, Max. 800*800
|
|
|
V3.00.58.221212 Customized Version ONLY. Pls DO NOT upgrade by yourself.
|
|
|
N/A
|
|
|
N/A
|
|
|
Compatibility with iVMS-4200 Optimized.
|
|
|
N/A
|
|
|
N/A
|
|
|
Multicast, Video Loss, Corridor Mode for TikTok Optimized.
|
|
|
N/A
|
|
|
N/A
|
|
|
N/A
|
|
|
N/A
|
|
|
N/A
|
|
|
N/A
|
Related Articles
FAQs: WiFi of Encoder
Why is it failed to connect to WiFi? To troubleshoot the issue, you can try following steps: Ensure that the SSID (WiFi network name) consists of a combination of alphabets in English and numbers only. Double-check if the password entered for the ...FAQs: Download Firmware for Encoder
How can we access the page of download firmware? It's only visible for our registered users. The reason why you are unable to access the page to download the firmware is likely because EXVIST Cares requires users to register and log in before you can ...FAQs: System Info of Encoder
How can we tell when the firmware was released? The firmware version number often contains information that indicates when it was released. For example, "V3.00.52.220921," the information can be interpreted as follows: "V3.00.52" comprises the main ...FAQs: Maintain/Upgrade of Encoder
Can we upgrade firmware directly through UI? Upgrading firmware directly through the user interface (UI) of an encoder is generally NOT RECOMMENDED, due to the potential risks associated with the process. Firmware upgrades can significantly impact ...Upgrade firmware for Encoder
Upgrade Firmware via Device Manager Open the file folder of EncDevice Double click "EncDeviceTool.exe" and then it will work Click "Refresh" -->Enter username and password at the right bottom side; Select the device-->Enter Start IP & IP ...