System
FAQs: Overview of Encoder
What does 1920*1080P@30HZ mean? If it shows 1920*1080P@30HZ on GUI, probably it's failed to detect the HDMI signal. Take the following steps if there is a failure to detect an HDMI signal. Ensuring that the HDMI cable is properly connected and meets ...
FAQs: Uart Transmit of Encoder
How can we utilize UART transmit for transparent communication with a mini encoder board? Upgrade the specified kernel which can be downloaded from KNGK_V0.00.221008_UartTransmit and download the specific test tool from Transparent Transmission by ...
FAQs: System Info of Encoder
How can we tell when the firmware was released? The firmware version number often contains information that indicates when it was released. For example, "V3.00.52.220921," the information can be interpreted as follows: "V3.00.52" comprises the main ...
FAQs: Maintain/Upgrade of Encoder
Can we upgrade firmware directly through UI? Upgrading firmware directly through the user interface (UI) of an encoder is generally NOT RECOMMENDED, due to the potential risks associated with the process. Firmware upgrades can significantly impact ...
FAQs: Auto Reboot of Encoder
Why is there no tab Auto Reboot in our encoder? The absence of an "Auto Reboot" tab in an encoder's settings may be due to a few reasons: Software Version: It's possible that the "Auto Reboot" feature is not available in the current software version ...
FAQs: Date & Time of Encoder
Why should I configure Date & Time? Setting the date and time on the encoder is crucial for leveraging its recording capabilities effectively. The accuracy of the date and time is essential for various functionalities, particularly when searching for ...
FAQs: System Settings of Encoder
System Mode Is it possible to switch the System Mode? Yes, it is possible to switch the system mode, subject to the following conditions: Depending on the models and their capabilities, the ability to switch system modes may vary. Some models may ...