RTSP Push Setup and Troubleshooting for HDMI Encoders | FAQs

FAQs: RTSP Push of Encoder

What's RTSP Push to Wowza Video?

RTSP Push to Wowza Video refers to the ability to stream live video to Wowza Video software by using the Real Time Streaming Protocol (RTSP). This allows for the transmission of live video and ensures seamless playback for viewers. Additionally, this feature supports the use of H.265, a video compression standard that offers higher efficiency and improved video quality compared to its predecessors. Overall, RTSP Push to Wowza Video with H.265 support provides an advanced and reliable method for streaming live video content.
Notes
NOTE: ONLY available in the latest firmware released around December 2023.
You can also read more about FAQs: RTSP Push to Wowza Video.

At what point is it possible to utilize RTSP Push in EXVIST's encoder?

RTSP (Real Time Streaming Protocol) Push can be used in your encoder when you want to push the video stream from the encoder to a server or streaming platform using the RTSP protocol. This can be beneficial in scenarios where you need to stream live video content to an RTSP-compatible server or platform for distribution and viewing by your audience. And it's worth noting that RTSP Push is compatible with H.265 encoding while RTMP Push is only compatible with H.264 encoding.

However, it's important to note that the availability and compatibility of RTSP Push in your encoder depend on the firmware version. As of the latest firmware release around December 2023, RTSP Push is available in the encoder. If you are not using the latest firmware, an upgrade is necessary to access this feature.

Additionally, the use of RTSP Push with your encoder has been verified and tested with specific platforms such as Wowza Streaming Engine and Wowza Video. For other platforms, further testing, verification, or integration may be required to ensure compatibility and proper functionality. Therefore, if you intend to use RTSP Push with a platform other than those verified, it is advisable to seek confirmation of compatibility or conduct additional testing to ensure seamless integration.
NotesNOTE: You can also read more about FAQs: RTSP of Encoder for pulling stream.




    • Related Articles

    • RTSP Push of Encoder

      RTSP Go to Setting->Push->RTSP Item Description Main Stream Enable: Check the checkbox; Video Push: Enter PUSH URL; Push Mode: Complex/Video/Audio Sub Stream Enable: Check the checkbox; Video Push: Enter PUSH URL; Push Mode: Complex/Video/Audio Push ...
    • FAQs: Wowza of Encoder

      RTSP(Pull Stream) to Wowza Streaming Engine RTMP(Push Stream) to Wowza Video RTSP(Push Stream) to Wowza Video Please refer to RTSP Push to Wowza Video first
    • RTSP of Encoder

      RTSP Go to Setting->Network->RTSP Item Description Authentication Check the checkbox if required Port Change port if required Main Stream Preview URL: rtsp://192.168.1.120:554/live/1_0; Stream mode: Complex/Video/Audio; Sub Stream Preview URL: ...
    • FAQs: RTSP of Encoder

      What's RTSP stream? RTSP (Real Time Streaming Protocol) is a network control protocol designed for controlling the delivery of multimedia data, such as audio and video, over a network. It enables the smooth transmission of live or pre-recorded audio ...
    • Video of Encoder

      Video Go to Setting->Video/Audio->Video Item Description Video Main stream/Sub stream Codec type H.264/H.265 Resolution Up to 1920*1080P(Main Stream) Bitrate Mode VBR/CBR Framerate Up to 25/30fps or 50/60fps, Determined by System Mode GOP(Key ...