FAQs: Using HDMI Encoder with Dahua NVR

FAQs: Dahua's NVR with Encoder

How to connnect this encoder to Dahua's NVR?

First, make sure the encoder and NVR are on the same network segment. Then follow these steps to add the device:
  1. Right-click the mouse and select [Remote Device] from the menu.
  2. Click [Search Devices], and the system will automatically scan for nearby devices.
  3. Check the IP address of the encoder you wish to add.
  4. Click [Add] to complete the device addition.
After completing these steps, you will see the following interface: the device status will turn green, indicating it is connected, and the video image will appear on the screen.

Finally, right-click and select Exit Add Device to close the current window and proceed with other operations.

This will successfully add the encoder to the Dahua's NVR, and you can continue with subsequent configurations and tasks.

    • Related Articles

    • FAQs: Hikvision's NVR with Encoder

      How to connnect this encoder to Hikvision's NVR? First, ensure that the encoder and the NVR (Network Video Recorder) are in the same network segment. This means that both devices should have IP addresses within the same subnet for proper ...

    • FAQs: Image of Encoder

      Why is there no preview in the Image Settings Page on my HDMI encoder? If you can't see a preview in the image settings page on your HDMI encoder, it's likely due to using an outdated firmware version. Here’s how to address the issue: 1. Firmware ...

    • FAQs: Maintain/Upgrade of Encoder

      Can we upgrade firmware directly through UI? Upgrading firmware directly through the user interface (UI) of an encoder is generally NOT RECOMMENDED, due to the potential risks associated with the process. Firmware upgrades can significantly impact ...

    • FAQs: ONVIF of Encoder

      Is your encoder compatible with ONVIF Profile T? Absolutely, our encoder fully supports ONVIF Profile T and ONVIF Profile S, ensuring seamless compatibility and functionality with a wide array of devices and systems, offering comprehensive ...

    • FAQs: System Settings of Encoder

      System Mode Is it possible to switch the System Mode? Yes, it is possible to switch the system mode, subject to the following conditions: Depending on the models and their capabilities, the ability to switch system modes may vary. Some models may ...