Absolutely, our encoder fully supports ONVIF Profile T and ONVIF Profile S, ensuring seamless compatibility and functionality with a wide array of devices and systems, offering comprehensive interoperability and efficient integration within diverse surveillance environments.
How to view live video in ODM?
Normally, you'll need to enter the username and password in the top left corner of the ONVIF Device Manager, as ONVIF authentication is enabled by default in the encoder (under Settings -> Security -> ONVIF). Once the correct username and password are entered, the video stream should become visible in the ONVIF Device Manager.
What is the Device Manager? The Device Manager is a tool for managing EXVIST encoder decoder in your local area network, it's just designed for below features: Searching encoders in the attached network; Quickly modifying IP addresses in batch; ...
ONVIF Go to Setting->Security->ONVIF NOTES: To enable ONVIF Authentication, simply check the checkbox. Once enabled, you must enter a username and password to log into the ONVIF Device Manager and view the live video. Otherwise, the ONVIF Device ...
Can we upgrade firmware directly through UI? Upgrading firmware directly through the user interface (UI) of an encoder is generally NOT RECOMMENDED, due to the potential risks associated with the process. Firmware upgrades can significantly impact ...
What does 1920*1080P@30HZ mean? If it shows 1920*1080P@30HZ on GUI, probably it's failed to detect the HDMI signal. Take the following steps if there is a failure to detect an HDMI signal. Ensuring that the HDMI cable is properly connected and meets ...
Video Go to Setting->Video/Audio->Video Item Description Video Main stream/Sub stream Codec type H.264/H.265 Resolution Up to 1920*1080P(Main Stream) Bitrate Mode VBR/CBR Framerate Up to 25/30fps or 50/60fps, Determined by System Mode GOP(Key ...